Assessor Resource

TLIC2080
Start up, shut down and stable medium/heavy self-propelled on-track equipment

Assessment tool

Version 1.0
Issue Date: April 2024


This unit involves the skills and knowledge required to start up, prepare, shut down and stable a medium/heavy self-propelled ontrack vehicle on a rail network in accordance with network owner policies and procedures.

It includes inspecting and preparing track vehicle, starting up track vehicle, conducting in-cab check, stabling medium heavy self-propelled track vehicle, shutting down track vehicle and performing post operational procedures.

Medium or heavy on-track equipment generally weighs more than 10 tonnes and is permanently railed.

Medium or heavy self-propelled on-track vehicles may include:

ballast cleaner

ballast regulator

dynamic stabiliser

inserter/remover (TR10)

rail crane

rail grinder

spot tamper

tamper

track layer

track recorder.

This unit is suitable for rail safety workers required to start up and prepare a medium/heavy self-propelled on-track vehicle prior to leaving a stabling location. It also covers stabling a medium/heavy self-propelled track vehicle, including shutting the vehicle down and securing it.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Inspect and prepare track vehicle

1.1

Identification and location of track vehicle is confirmed

1.2

Logbook and track vehicle are checked for out of service indications and to confirm serviceability and logbook is completed accurately in accordance with organisational requirements or manufacturer specification

1.3

Track vehicle kit and equipment are checked and defects and deficiencies are recorded and rectified, isolated, tagged or reported in accordance with organisational procedures, as applicable

1.4

Consumables are checked and replenished as required

1.5

External visual checks are conducted in accordance with manufacturer and/or organisational procedures

1.6

Problems are identified and rectified in accordance with organisational procedures

1.7

Identified problems are reported and/or documented in accordance with organisational procedures

2

Start up track vehicle

2.1

Track vehicle is started in accordance with manufacturer instructions and/or organisational procedures

2.2

Operating faults are identified, diagnosed, rectified and/or reported and recorded in accordance with organisational procedures

2.3

Appropriate instruments and gauges are observed and readings are interpreted to confirm effective operation in accordance with manufacturer and/or organisational procedures

2.4

Fluid levels are rechecked after starting and appropriate action is taken as required

3

Conduct in-cab checks

3.1

Track vehicle incab checks are conducted in accordance with manufacturer and/or organisational procedures

3.2

Driver safety systems are checked to ensure they are functioning correctly and appropriate action is taken if they are not

3.3

Communications equipment is checked to ensure it is functioning correctly and appropriate action is taken if it is not

3.4

Auxiliary and emergency equipment is checked and confirmed to be operational in accordance with operating requirements

3.5

Documentation concerning inspecting track vehicle is completed and processed as required in accordance with organisational procedures

4

Stable medium/heavy self-propelled track vehicle

4.1

Approval is requested from appropriate person to direct when and where to stable self-propelled track vehicle

4.2

Track vehicle is moved to nominated stabling location

4.3

Appropriate person is contacted and informed that track vehicle is at nominated location and intact

4.4

Track vehicle is stabled as directed

4.5

Track vehicle is left in appropriate manner to ensure security and protection of vehicle and ancillary equipment

5

Shut down track vehicle

5.1

Track vehicle is shut down in accordance with manufacturer and/or organisational procedures

5.2

Track vehicle is secured in accordance with organisational procedures

5.3

Control/isolation equipment and cab are secured in accordance with organisational procedures

6

Perform post-operational procedures

6.1

Post-operational checks are conducted in accordance with manufacturer specifications and/or organisational procedures to identify defects and maintenance requirements

6.2

Identified problems are reported in accordance with organisational procedures

6.3

Post-operating service schedules are conducted in accordance with organisational procedures

6.4

Documentation is completed and processed as required, in accordance with organisational procedures

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least three separate occasions and include:

applying relevant workplace procedures

communicating effectively with others

following operational instructions

identifying correct shut-down procedures in accordance with manufacturer instructions and workplace procedures

identifying correct start-up procedures in accordance with manufacturer instructions and workplace procedures

modifying activities depending on operational contingencies, risk situations and environments

reporting and/or rectifying identified problems, faults or malfunctions, in accordance with regulatory requirements and workplace procedures

securing vehicles in accordance with manufacturer instructions and workplace procedures, when stabling on-track equipment

working collaboratively with others.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

emergency management plans and procedures

hazards that may exist during start up and shut down of medium/heavy self-propelled track vehicles and ways of controlling the risks involved

network owner rules and regulations applicable to starting up, shutting down and stabling medium/heavy self-propelled on-track equipment

organisational procedures for starting up and shutting down medium/heavy self-propelled on-track equipment

problems that may occur when preparing and stabling medium/heavy self-propelled on-track equipment and action that can be taken to report or resolve these problems

relevant documentation concerning inspecting on-track equipment

relevant manufacturer specifications and workplace procedures for medium/heavy self-propelled on-track equipment

relevant rail danger zones and safeworking systems

relevant rail safety work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur on medium/heavy self-propelled on-track equipment, in workplace operational situations or, where this is not available, in simulated workplace operational situations that replicate rail corridor workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment include:

a range of relevant exercises, case studies and/or simulations

relevant and appropriate materials, tools, equipment and personal protective equipment currently used in industry

applicable documentation including workplace procedures, regulations, rail industry standards, codes of practice, manufacturer specifications and operation manuals.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Inspect and prepare track vehicle

1.1

Identification and location of track vehicle is confirmed

1.2

Logbook and track vehicle are checked for out of service indications and to confirm serviceability and logbook is completed accurately in accordance with organisational requirements or manufacturer specification

1.3

Track vehicle kit and equipment are checked and defects and deficiencies are recorded and rectified, isolated, tagged or reported in accordance with organisational procedures, as applicable

1.4

Consumables are checked and replenished as required

1.5

External visual checks are conducted in accordance with manufacturer and/or organisational procedures

1.6

Problems are identified and rectified in accordance with organisational procedures

1.7

Identified problems are reported and/or documented in accordance with organisational procedures

2

Start up track vehicle

2.1

Track vehicle is started in accordance with manufacturer instructions and/or organisational procedures

2.2

Operating faults are identified, diagnosed, rectified and/or reported and recorded in accordance with organisational procedures

2.3

Appropriate instruments and gauges are observed and readings are interpreted to confirm effective operation in accordance with manufacturer and/or organisational procedures

2.4

Fluid levels are rechecked after starting and appropriate action is taken as required

3

Conduct in-cab checks

3.1

Track vehicle incab checks are conducted in accordance with manufacturer and/or organisational procedures

3.2

Driver safety systems are checked to ensure they are functioning correctly and appropriate action is taken if they are not

3.3

Communications equipment is checked to ensure it is functioning correctly and appropriate action is taken if it is not

3.4

Auxiliary and emergency equipment is checked and confirmed to be operational in accordance with operating requirements

3.5

Documentation concerning inspecting track vehicle is completed and processed as required in accordance with organisational procedures

4

Stable medium/heavy self-propelled track vehicle

4.1

Approval is requested from appropriate person to direct when and where to stable self-propelled track vehicle

4.2

Track vehicle is moved to nominated stabling location

4.3

Appropriate person is contacted and informed that track vehicle is at nominated location and intact

4.4

Track vehicle is stabled as directed

4.5

Track vehicle is left in appropriate manner to ensure security and protection of vehicle and ancillary equipment

5

Shut down track vehicle

5.1

Track vehicle is shut down in accordance with manufacturer and/or organisational procedures

5.2

Track vehicle is secured in accordance with organisational procedures

5.3

Control/isolation equipment and cab are secured in accordance with organisational procedures

6

Perform post-operational procedures

6.1

Post-operational checks are conducted in accordance with manufacturer specifications and/or organisational procedures to identify defects and maintenance requirements

6.2

Identified problems are reported in accordance with organisational procedures

6.3

Post-operating service schedules are conducted in accordance with organisational procedures

6.4

Documentation is completed and processed as required, in accordance with organisational procedures

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the Companion Volume Implementation Guide.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least three separate occasions and include:

applying relevant workplace procedures

communicating effectively with others

following operational instructions

identifying correct shut-down procedures in accordance with manufacturer instructions and workplace procedures

identifying correct start-up procedures in accordance with manufacturer instructions and workplace procedures

modifying activities depending on operational contingencies, risk situations and environments

reporting and/or rectifying identified problems, faults or malfunctions, in accordance with regulatory requirements and workplace procedures

securing vehicles in accordance with manufacturer instructions and workplace procedures, when stabling on-track equipment

working collaboratively with others.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

emergency management plans and procedures

hazards that may exist during start up and shut down of medium/heavy self-propelled track vehicles and ways of controlling the risks involved

network owner rules and regulations applicable to starting up, shutting down and stabling medium/heavy self-propelled on-track equipment

organisational procedures for starting up and shutting down medium/heavy self-propelled on-track equipment

problems that may occur when preparing and stabling medium/heavy self-propelled on-track equipment and action that can be taken to report or resolve these problems

relevant documentation concerning inspecting on-track equipment

relevant manufacturer specifications and workplace procedures for medium/heavy self-propelled on-track equipment

relevant rail danger zones and safeworking systems

relevant rail safety work health and safety (WHS)/occupational health and safety (OHS) and environmental procedures and regulations.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur on medium/heavy self-propelled on-track equipment, in workplace operational situations or, where this is not available, in simulated workplace operational situations that replicate rail corridor workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment include:

a range of relevant exercises, case studies and/or simulations

relevant and appropriate materials, tools, equipment and personal protective equipment currently used in industry

applicable documentation including workplace procedures, regulations, rail industry standards, codes of practice, manufacturer specifications and operation manuals.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Forms

Assessment Cover Sheet

TLIC2080 - Start up, shut down and stable medium/heavy self-propelled on-track equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

TLIC2080 - Start up, shut down and stable medium/heavy self-propelled on-track equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: