Assessor Resource

TLIC3084
Operate a lift on/lift off collection vehicle

Assessment tool

Version 1.0
Issue Date: April 2024


This unit involves the skills and knowledge required to operate a lift on/lift off (skip/marrell) collection vehicle (the ‘vehicle’).

It includes following safety requirements, loading project bins onto vehicles, unloading product from vehicles and completing documentation, and unloading product bins from vehicles.

Vehicle operation must be carried out in compliance with relevant state/territory and traffic authority vehicle licence requirements and regulations.

Work is performed with limited or no supervision, with accountability and responsibility for self and others in achieving the prescribed outcomes.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Follow safety requirements

1.1

Operator and third party safety is observed in accordance with organisational, manufacturer and legislative requirements

1.2

Vehicle controls are checked and operated in accordance with organisational, manufacturer requirements

1.3

Vehicle cleaning and non-technical maintenance is undertaken in accordance with organisational and manufacturer requirements

1.4

Safety items are used and stored in accordance with organisational and manufacturer requirements

1.5

Hazards are identified, risks are assessed and control measures are implemented

1.6

Defective equipment is reported in accordance with organisational and manufacturer requirements

2

Load product bin onto vehicle

2.1

Vehicle is made ready to operate in accordance with organisational and manufacturer requirements

2.2

Product streams to be collected are identified

2.3

Documentation provided is used to determine location/s to collect product

2.4

Prior to (manual tarping) or after (automated tarping) loading product bin onto vehicle, covering of load is determined

2.5

Product bin is loaded onto vehicle in accordance with organisational, manufacturer and legislative requirements.

2.6

Product bin is secured to vehicle in accordance with organisational, manufacturer and legislative requirements

2.7

Product is removed from ground and no product is left on lifting equipment, vehicle or vehicle body

2.8

Prior to travel, load covers are tied down in accordance with organisational, manufacturer and legislative requirements

3

Unload product from vehicle and complete relevant documentation

3.1

Vehicle is positioned on level, stable ground to ensure vehicle safety and stability when unloading

3.2

Vehicle is positioned to allow unloading, in accordance with site, organisational, manufacturer and legislative requirements

3.3

Load covers (tarps) are removed in accordance with organisational, manufacturer and legislative requirements

3.4

Unloading equipment is operated in accordance with organisational, manufacturer and legislative requirements

3.5

Return of equipment used to transit position is ensured

3.6

Documentation for unloaded product is completed in accordance with organisational, manufacturer and legislative requirements

4

Unload product bin from vehicle

4.1

Vehicle is positioned on level, stable ground to ensure vehicle safety and stability when unloading

4.2

Vehicle is positioned to allow unloading, in accordance with site, organisational, manufacturer and legislative requirements

4.3

Unloading equipment is operated in accordance with organisational, manufacturer and legislative requirements

4.4

Return of equipment used to transit position is ensured

4.5

Documentation for unloaded product bin is completed in accordance with organisational, manufacturer and legislative requirements

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

applying appropriate techniques for loading and unloading vehicle

applying correct manual handling techniques when operating vehicle and/or product containers

applying eco-driving techniques

applying precautions and required action to minimise, control or eliminate identified hazards

identifying, loading and transporting product streams in accordance with organisational, manufacturer and legislative requirements

interpreting and following operational instructions and prioritising work

monitoring performance of vehicle and equipment and taking appropriate action as required

operating and adapting to differences in equipment in accordance with operating procedures

operating vehicle cabin functions correctly

positioning product containers/bins manually

reading, interpreting and following relevant instructions, procedures, information and signs

working collaboratively with others.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

customer requirements when picking up product or delivering product to a product collection facility

organisational and manufacturer procedures for transporting product in the vehicle

relevant legislative and regulatory requirements

relevant state/territory roads and traffic authority road rules, regulations, permits and licence requirements

safe pickup and delivery of product to and from site

vehicle loading and unloading procedures

workplace documentation

workplace driving and operational instructions.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment include:

a range of relevant exercises, case studies and/or simulations

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Follow safety requirements

1.1

Operator and third party safety is observed in accordance with organisational, manufacturer and legislative requirements

1.2

Vehicle controls are checked and operated in accordance with organisational, manufacturer requirements

1.3

Vehicle cleaning and non-technical maintenance is undertaken in accordance with organisational and manufacturer requirements

1.4

Safety items are used and stored in accordance with organisational and manufacturer requirements

1.5

Hazards are identified, risks are assessed and control measures are implemented

1.6

Defective equipment is reported in accordance with organisational and manufacturer requirements

2

Load product bin onto vehicle

2.1

Vehicle is made ready to operate in accordance with organisational and manufacturer requirements

2.2

Product streams to be collected are identified

2.3

Documentation provided is used to determine location/s to collect product

2.4

Prior to (manual tarping) or after (automated tarping) loading product bin onto vehicle, covering of load is determined

2.5

Product bin is loaded onto vehicle in accordance with organisational, manufacturer and legislative requirements.

2.6

Product bin is secured to vehicle in accordance with organisational, manufacturer and legislative requirements

2.7

Product is removed from ground and no product is left on lifting equipment, vehicle or vehicle body

2.8

Prior to travel, load covers are tied down in accordance with organisational, manufacturer and legislative requirements

3

Unload product from vehicle and complete relevant documentation

3.1

Vehicle is positioned on level, stable ground to ensure vehicle safety and stability when unloading

3.2

Vehicle is positioned to allow unloading, in accordance with site, organisational, manufacturer and legislative requirements

3.3

Load covers (tarps) are removed in accordance with organisational, manufacturer and legislative requirements

3.4

Unloading equipment is operated in accordance with organisational, manufacturer and legislative requirements

3.5

Return of equipment used to transit position is ensured

3.6

Documentation for unloaded product is completed in accordance with organisational, manufacturer and legislative requirements

4

Unload product bin from vehicle

4.1

Vehicle is positioned on level, stable ground to ensure vehicle safety and stability when unloading

4.2

Vehicle is positioned to allow unloading, in accordance with site, organisational, manufacturer and legislative requirements

4.3

Unloading equipment is operated in accordance with organisational, manufacturer and legislative requirements

4.4

Return of equipment used to transit position is ensured

4.5

Documentation for unloaded product bin is completed in accordance with organisational, manufacturer and legislative requirements

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the Companion Volume Implementation Guide.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

applying appropriate techniques for loading and unloading vehicle

applying correct manual handling techniques when operating vehicle and/or product containers

applying eco-driving techniques

applying precautions and required action to minimise, control or eliminate identified hazards

identifying, loading and transporting product streams in accordance with organisational, manufacturer and legislative requirements

interpreting and following operational instructions and prioritising work

monitoring performance of vehicle and equipment and taking appropriate action as required

operating and adapting to differences in equipment in accordance with operating procedures

operating vehicle cabin functions correctly

positioning product containers/bins manually

reading, interpreting and following relevant instructions, procedures, information and signs

working collaboratively with others.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

customer requirements when picking up product or delivering product to a product collection facility

organisational and manufacturer procedures for transporting product in the vehicle

relevant legislative and regulatory requirements

relevant state/territory roads and traffic authority road rules, regulations, permits and licence requirements

safe pickup and delivery of product to and from site

vehicle loading and unloading procedures

workplace documentation

workplace driving and operational instructions.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment include:

a range of relevant exercises, case studies and/or simulations

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Operator and third party safety is observed in accordance with organisational, manufacturer and legislative requirements 
Vehicle controls are checked and operated in accordance with organisational, manufacturer requirements 
Vehicle cleaning and non-technical maintenance is undertaken in accordance with organisational and manufacturer requirements 
Safety items are used and stored in accordance with organisational and manufacturer requirements 
Hazards are identified, risks are assessed and control measures are implemented 
Defective equipment is reported in accordance with organisational and manufacturer requirements 
Vehicle is made ready to operate in accordance with organisational and manufacturer requirements 
Product streams to be collected are identified 
Documentation provided is used to determine location/s to collect product 
Prior to (manual tarping) or after (automated tarping) loading product bin onto vehicle, covering of load is determined 
Product bin is loaded onto vehicle in accordance with organisational, manufacturer and legislative requirements. 
Product bin is secured to vehicle in accordance with organisational, manufacturer and legislative requirements 
Product is removed from ground and no product is left on lifting equipment, vehicle or vehicle body 
Prior to travel, load covers are tied down in accordance with organisational, manufacturer and legislative requirements 
Vehicle is positioned on level, stable ground to ensure vehicle safety and stability when unloading 
Vehicle is positioned to allow unloading, in accordance with site, organisational, manufacturer and legislative requirements 
Load covers (tarps) are removed in accordance with organisational, manufacturer and legislative requirements 
Unloading equipment is operated in accordance with organisational, manufacturer and legislative requirements 
Return of equipment used to transit position is ensured 
Documentation for unloaded product is completed in accordance with organisational, manufacturer and legislative requirements 
Vehicle is positioned on level, stable ground to ensure vehicle safety and stability when unloading 
Vehicle is positioned to allow unloading, in accordance with site, organisational, manufacturer and legislative requirements 
Unloading equipment is operated in accordance with organisational, manufacturer and legislative requirements 
Return of equipment used to transit position is ensured 
Documentation for unloaded product bin is completed in accordance with organisational, manufacturer and legislative requirements 

Forms

Assessment Cover Sheet

TLIC3084 - Operate a lift on/lift off collection vehicle
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

TLIC3084 - Operate a lift on/lift off collection vehicle

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: