Assessor Resource

TLID2013
Move materials mechanically using automated equipment

Assessment tool

Version 1.0
Issue Date: April 2024


This unit involves the skills and knowledge required to move materials mechanically using automated equipment such as automatic guided vehicles, tow motors, low level order pickers, conveyor systems and mechanised pallet movers.

It includes selecting appropriate mechanical moving equipment, moving materials/goods in accordance with operational requirements, checking condition of materials/goods and completing all required documentation.

Work must be carried out in compliance with relevant work health and safety (WHS)/occupational health and safety (OHS) regulations concerning moving materials mechanically using automated equipment.

Work is performed under limited or minimum supervision.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Select load moving equipment

1.1

Mechanised handling equipment, route to be taken and procedures to be used are selected appropriate to goods characteristics

1.2

Dangerous goods and hazardous materials are identified and handled in accordance with codes of practice, WHS/OHS requirements and workplace procedures

2

Move goods

2.1

Hazards are identified, risks are assessed and control measures are implemented

2.2

Goods are moved using selected materials handling equipment in accordance with WHS/OHS regulations, manufacturer instructions and workplace procedures

2.3

Problems moving goods and materials using automated equipment are identified and reported in accordance with workplace procedures

3

Check goods and complete documentation

3.1

Relocated goods are inspected for possible damage during transit/movement and appropriate action is taken

3.2

Appropriate documentation is completed to track moved goods in accordance with workplace procedures

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria on at least one occasion and include:

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant legislation and workplace procedures

checking and replenishing fluids and carrying out lubrication processes during work activities

communicating effectively with others

ensuring servicing of automated equipment in terms of maintenance schedule and standard operating procedures

implementing contingency plans

monitoring and prioritising work activities in terms of planned schedule

monitoring performance of automated equipment and taking appropriate action as required

operating and adapting to differences in equipment in accordance with operating procedures

operating electronic communications equipment to required protocol

reading, interpreting and following relevant instructions, procedures, information and signs

reporting and/or rectifying identified problems, faults or malfunctions promptly, in accordance with regulatory requirements and workplace procedures

selecting and using required personal protective equipment conforming to industry and work health and safety (WHS)/occupational health and safety (OHS) standards

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and include knowledge of:

housekeeping standards and procedures

operational work systems, equipment, management and site operating systems for using automated equipment to move materials mechanically

problems that may occur and appropriate action that can be taken to resolve these problems

purpose, characteristics, capabilities, requirements and limitations of automated materials moving equipment

relevant regulations, workplace procedures and policies for using automated equipment to move materials mechanically

relevant WHS/OHS and environmental protection procedures and guidelines

risks when using automated equipment to move materials and related precautions to control the risks

site layout and obstacles.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment include:

a range of relevant exercises, case studies and/or simulations

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

automated equipment such as:

automatic guided vehicles

tow motors

low level order pickers

conveyor systems

mechanised pallet movers

relevant materials, tools, equipment and personal protective equipment currently used in industry.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Select load moving equipment

1.1

Mechanised handling equipment, route to be taken and procedures to be used are selected appropriate to goods characteristics

1.2

Dangerous goods and hazardous materials are identified and handled in accordance with codes of practice, WHS/OHS requirements and workplace procedures

2

Move goods

2.1

Hazards are identified, risks are assessed and control measures are implemented

2.2

Goods are moved using selected materials handling equipment in accordance with WHS/OHS regulations, manufacturer instructions and workplace procedures

2.3

Problems moving goods and materials using automated equipment are identified and reported in accordance with workplace procedures

3

Check goods and complete documentation

3.1

Relocated goods are inspected for possible damage during transit/movement and appropriate action is taken

3.2

Appropriate documentation is completed to track moved goods in accordance with workplace procedures

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the Companion Volume Implementation Guide.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria on at least one occasion and include:

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant legislation and workplace procedures

checking and replenishing fluids and carrying out lubrication processes during work activities

communicating effectively with others

ensuring servicing of automated equipment in terms of maintenance schedule and standard operating procedures

implementing contingency plans

monitoring and prioritising work activities in terms of planned schedule

monitoring performance of automated equipment and taking appropriate action as required

operating and adapting to differences in equipment in accordance with operating procedures

operating electronic communications equipment to required protocol

reading, interpreting and following relevant instructions, procedures, information and signs

reporting and/or rectifying identified problems, faults or malfunctions promptly, in accordance with regulatory requirements and workplace procedures

selecting and using required personal protective equipment conforming to industry and work health and safety (WHS)/occupational health and safety (OHS) standards

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and include knowledge of:

housekeeping standards and procedures

operational work systems, equipment, management and site operating systems for using automated equipment to move materials mechanically

problems that may occur and appropriate action that can be taken to resolve these problems

purpose, characteristics, capabilities, requirements and limitations of automated materials moving equipment

relevant regulations, workplace procedures and policies for using automated equipment to move materials mechanically

relevant WHS/OHS and environmental protection procedures and guidelines

risks when using automated equipment to move materials and related precautions to control the risks

site layout and obstacles.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment include:

a range of relevant exercises, case studies and/or simulations

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

automated equipment such as:

automatic guided vehicles

tow motors

low level order pickers

conveyor systems

mechanised pallet movers

relevant materials, tools, equipment and personal protective equipment currently used in industry.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Mechanised handling equipment, route to be taken and procedures to be used are selected appropriate to goods characteristics 
Dangerous goods and hazardous materials are identified and handled in accordance with codes of practice, WHS/OHS requirements and workplace procedures 
Hazards are identified, risks are assessed and control measures are implemented 
Goods are moved using selected materials handling equipment in accordance with WHS/OHS regulations, manufacturer instructions and workplace procedures 
Problems moving goods and materials using automated equipment are identified and reported in accordance with workplace procedures 
Relocated goods are inspected for possible damage during transit/movement and appropriate action is taken 
Appropriate documentation is completed to track moved goods in accordance with workplace procedures 

Forms

Assessment Cover Sheet

TLID2013 - Move materials mechanically using automated equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

TLID2013 - Move materials mechanically using automated equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: