Assessor Resource

TLIF4108
Implement traffic management plan in the transport industry

Assessment tool

Version 1.0
Issue Date: April 2024


This unit involves the skills and knowledge required to implement traffic management plans in the transport and logistics industry.

It includes planning, implementing, monitoring, evaluating, auditing and packing up a traffic management plan, and undertaking housekeeping duties in a control room and on site.

Traffic management plans include those for public and private roads, parking areas and restricted access sites.

This unit is appropriate for those working in operational roles within tunnel and open road operations.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for traffic management plan implementation

1.1

Relevant documentation is accessed and interpreted in accordance with workplace procedures, regulatory requirements and codes of practice

1.2

Safety requirements for allotted tasks are obtained, confirmed and applied in accordance with workplace policies, procedures and regulatory requirements

1.3

Relevant signage and devices are identified, obtained and implemented in accordance with traffic management plan, workplace procedures and regulatory requirements

1.4

Required tools and equipment are selected for traffic management plan

1.5

Environmental protection requirements are identified and applied in accordance with workplace procedures and regulatory requirements

1.6

Legislative/operational requirements for assigned traffic controller are checked and confirmed in accordance with workplace procedures and regulatory requirements

1.7

Requirements for traffic flow are communicated appropriately in accordance with workplace procedures and regulatory requirements

1.8

Work crew safety is appropriately considered in traffic management plan in accordance with workplace procedures and regulatory requirements

2

Implement traffic management plan

2.1

Site specific traffic management plan is selected in accordance with workplace procedures and regulatory requirements

2.2

Traffic management plan requirements are determined, communicated and monitored in accordance with workplace procedures and regulatory requirements

2.3

Signage and device positioning is checked in accordance with traffic management plan, workplace procedures and regulatory requirements

2.4

Traffic management plan is appropriately adjusted on site in accordance with site specific conditions as appropriate to ensure work crew safety, in accordance with workplace procedures and regulatory requirements

3

Monitor traffic management plan

3.1

Traffic flow is monitored and effectiveness of traffic management plan is measured in accordance with workplace procedures and regulatory requirements

3.2

Traffic management plan adjustments are implemented in accordance with workplace procedures and regulatory requirements

3.3

Traffic controller performance is monitored in accordance with human resources and workplace policies and procedures

4

Evaluate and audit traffic management plan

4.1

Applied traffic management plan is checked to ensure it matches the approved plan in accordance with workplace procedures and regulatory requirements

4.2

Applied traffic management plan is audited to ensure compliance with approved safety plans in accordance with workplace procedures and regulatory requirements

4.3

Traffic management plan is checked to ensure suitability to actual traffic conditions in accordance with workplace procedures and regulatory requirements

5

Pack up traffic management plan

5.1

Traffic control devices are removed in a safe and sequential manner, in accordance with workplace policies and procedures, and regulatory requirements

5.2

Traffic management plan information is accurately recorded in accordance with workplace procedures and regulatory requirements

5.3

Workplace incidents are accurately reported in accordance with workplace procedures and regulatory requirements

6

Undertake housekeeping

6.1

Work area is cleared in accordance with project environmental management plan and workplace procedures

6.2

Work tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace policies

6.3

Traffic management signs are returned to pre-work state in accordance with workplace procedures

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

applying legislative requirements, workplace procedures and policies

communicating:

fault reporting

verbal instructions

complying with state/territory regulations and codes of practice

controlling traffic flow in accordance with traffic management plans

implementing consistent and timely traffic management plans that safely, effectively and efficiently meet required outcomes

implementing requirements, procedures and techniques for the safe, effective and efficient implementation of traffic management plans

working collaboratively with others to undertake and complete traffic management plans that meet all required outcomes.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

job safety analysis (JSA) or a safe operating procedure

potential hazards

processes for calculating travel time

radio and electronic communications

relevant compliance documentation including:

Australian Standards (AS)

codes of practice

legislative, organisational and site requirements and procedures

requirements, procedures and instructions for implementing traffic management plans

requirements set down by relevant:

state/territory codes of practice

AS such as AS 1742.3 Manual of uniform traffic control devices (MUTCD) – Traffic control for works on roads

safe work method statement (SWMS)

safety requirements including:

emergency procedures

safe operating procedures, including recognising and preventing hazards associated with the working environment

site and equipment safety requirements

signs and devices such as:

regulatory and traffic control devices

regulatory and traffic cones

temporary warning signs

traffic management systems

tunnel and open road terminology

use of tools and equipment including:

arrow boards

barricades

barriers

bollards

cones

delineators

high visibility vests

notebooks

pens

radios

signage

signalling devices

stop-slow bats

warning lights and beacons.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards forRegistered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards forRegistered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so. Where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Online assessment is not suitable for final assessment of this unit of competency.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment include:

a range of relevant exercises, case studies and/or simulations

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Prepare for traffic management plan implementation

1.1

Relevant documentation is accessed and interpreted in accordance with workplace procedures, regulatory requirements and codes of practice

1.2

Safety requirements for allotted tasks are obtained, confirmed and applied in accordance with workplace policies, procedures and regulatory requirements

1.3

Relevant signage and devices are identified, obtained and implemented in accordance with traffic management plan, workplace procedures and regulatory requirements

1.4

Required tools and equipment are selected for traffic management plan

1.5

Environmental protection requirements are identified and applied in accordance with workplace procedures and regulatory requirements

1.6

Legislative/operational requirements for assigned traffic controller are checked and confirmed in accordance with workplace procedures and regulatory requirements

1.7

Requirements for traffic flow are communicated appropriately in accordance with workplace procedures and regulatory requirements

1.8

Work crew safety is appropriately considered in traffic management plan in accordance with workplace procedures and regulatory requirements

2

Implement traffic management plan

2.1

Site specific traffic management plan is selected in accordance with workplace procedures and regulatory requirements

2.2

Traffic management plan requirements are determined, communicated and monitored in accordance with workplace procedures and regulatory requirements

2.3

Signage and device positioning is checked in accordance with traffic management plan, workplace procedures and regulatory requirements

2.4

Traffic management plan is appropriately adjusted on site in accordance with site specific conditions as appropriate to ensure work crew safety, in accordance with workplace procedures and regulatory requirements

3

Monitor traffic management plan

3.1

Traffic flow is monitored and effectiveness of traffic management plan is measured in accordance with workplace procedures and regulatory requirements

3.2

Traffic management plan adjustments are implemented in accordance with workplace procedures and regulatory requirements

3.3

Traffic controller performance is monitored in accordance with human resources and workplace policies and procedures

4

Evaluate and audit traffic management plan

4.1

Applied traffic management plan is checked to ensure it matches the approved plan in accordance with workplace procedures and regulatory requirements

4.2

Applied traffic management plan is audited to ensure compliance with approved safety plans in accordance with workplace procedures and regulatory requirements

4.3

Traffic management plan is checked to ensure suitability to actual traffic conditions in accordance with workplace procedures and regulatory requirements

5

Pack up traffic management plan

5.1

Traffic control devices are removed in a safe and sequential manner, in accordance with workplace policies and procedures, and regulatory requirements

5.2

Traffic management plan information is accurately recorded in accordance with workplace procedures and regulatory requirements

5.3

Workplace incidents are accurately reported in accordance with workplace procedures and regulatory requirements

6

Undertake housekeeping

6.1

Work area is cleared in accordance with project environmental management plan and workplace procedures

6.2

Work tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace policies

6.3

Traffic management signs are returned to pre-work state in accordance with workplace procedures

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions can be found in the Companion Volume Implementation Guide.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

applying legislative requirements, workplace procedures and policies

communicating:

fault reporting

verbal instructions

complying with state/territory regulations and codes of practice

controlling traffic flow in accordance with traffic management plans

implementing consistent and timely traffic management plans that safely, effectively and efficiently meet required outcomes

implementing requirements, procedures and techniques for the safe, effective and efficient implementation of traffic management plans

working collaboratively with others to undertake and complete traffic management plans that meet all required outcomes.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

job safety analysis (JSA) or a safe operating procedure

potential hazards

processes for calculating travel time

radio and electronic communications

relevant compliance documentation including:

Australian Standards (AS)

codes of practice

legislative, organisational and site requirements and procedures

requirements, procedures and instructions for implementing traffic management plans

requirements set down by relevant:

state/territory codes of practice

AS such as AS 1742.3 Manual of uniform traffic control devices (MUTCD) – Traffic control for works on roads

safe work method statement (SWMS)

safety requirements including:

emergency procedures

safe operating procedures, including recognising and preventing hazards associated with the working environment

site and equipment safety requirements

signs and devices such as:

regulatory and traffic control devices

regulatory and traffic cones

temporary warning signs

traffic management systems

tunnel and open road terminology

use of tools and equipment including:

arrow boards

barricades

barriers

bollards

cones

delineators

high visibility vests

notebooks

pens

radios

signage

signalling devices

stop-slow bats

warning lights and beacons.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards forRegistered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards forRegistered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so. Where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Online assessment is not suitable for final assessment of this unit of competency.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment include:

a range of relevant exercises, case studies and/or simulations

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Relevant documentation is accessed and interpreted in accordance with workplace procedures, regulatory requirements and codes of practice 
Safety requirements for allotted tasks are obtained, confirmed and applied in accordance with workplace policies, procedures and regulatory requirements 
Relevant signage and devices are identified, obtained and implemented in accordance with traffic management plan, workplace procedures and regulatory requirements 
Required tools and equipment are selected for traffic management plan 
Environmental protection requirements are identified and applied in accordance with workplace procedures and regulatory requirements 
Legislative/operational requirements for assigned traffic controller are checked and confirmed in accordance with workplace procedures and regulatory requirements 
Requirements for traffic flow are communicated appropriately in accordance with workplace procedures and regulatory requirements 
Work crew safety is appropriately considered in traffic management plan in accordance with workplace procedures and regulatory requirements 
Site specific traffic management plan is selected in accordance with workplace procedures and regulatory requirements 
Traffic management plan requirements are determined, communicated and monitored in accordance with workplace procedures and regulatory requirements 
Signage and device positioning is checked in accordance with traffic management plan, workplace procedures and regulatory requirements 
Traffic management plan is appropriately adjusted on site in accordance with site specific conditions as appropriate to ensure work crew safety, in accordance with workplace procedures and regulatory requirements 
Traffic flow is monitored and effectiveness of traffic management plan is measured in accordance with workplace procedures and regulatory requirements 
Traffic management plan adjustments are implemented in accordance with workplace procedures and regulatory requirements 
Traffic controller performance is monitored in accordance with human resources and workplace policies and procedures 
Applied traffic management plan is checked to ensure it matches the approved plan in accordance with workplace procedures and regulatory requirements 
Applied traffic management plan is audited to ensure compliance with approved safety plans in accordance with workplace procedures and regulatory requirements 
Traffic management plan is checked to ensure suitability to actual traffic conditions in accordance with workplace procedures and regulatory requirements 
Traffic control devices are removed in a safe and sequential manner, in accordance with workplace policies and procedures, and regulatory requirements 
Traffic management plan information is accurately recorded in accordance with workplace procedures and regulatory requirements 
Workplace incidents are accurately reported in accordance with workplace procedures and regulatory requirements 
Work area is cleared in accordance with project environmental management plan and workplace procedures 
Work tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace policies 
Traffic management signs are returned to pre-work state in accordance with workplace procedures 

Forms

Assessment Cover Sheet

TLIF4108 - Implement traffic management plan in the transport industry
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

TLIF4108 - Implement traffic management plan in the transport industry

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: