Assessor Resource

UEEEC0005
Assess electronic apparatus compliance

Assessment tool

Version 1.0
Issue Date: May 2024


This unit involves the skills and knowledge required to assess electronic apparatus compliance with relevant industry standards and regulations for certification or approval.

It includes preparing and evaluating electronic apparatus in determining specified compliance requirements, inspecting and setting up performance tests, evaluating inspection and test results, and documenting evaluation outcomes.

The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).

Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, skills and knowledge described in this unit require a relevant contract of training, such as an Australian Apprenticeship.

Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.

Permits may also be required for some work environments, such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation

No other licensing, legislative or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including:

implementing workplace procedures and practices

using risk control measures

applying sustainable energy principles and practices

identifying electronic apparatus compliance certification/approval specifications

interpreting compliance documents

setting up and conducting appropriate examinations, inspections and tests

evaluating electronic apparatus compliance

identifying non-compliance defects

reporting examination and test results and non-compliance issues clearly and accurately

dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment

completing apparatus assessment and documenting results

preparing to evaluate electronic apparatus certification/approval specifications compliance.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

compliance certification, including:

the purposes of certification of equipment

the parties involved in the assessment/testing and certification of equipment

the scheme for recognition of assessment/testing and certification

compliance testing and assessment of electronic apparatus equipment, including:

types of assessment, inspection and tests

test set-ups and workplace procedures

recording and reporting requirements of conformity assessment

preparation required to assess equipment for compliance with industry standards, including:

documentation required prior to conducting conformity assessment

tests necessary to establish that an item of equipment conforms with relevant industry standards

relevant compliance certification/approval specifications

relevant job safety assessments or risk mitigation processes, including:

safe working practices

relevant manufacturer specifications

relevant technical industry standards, regulations, codes of practice for electronic apparatus and WHS/OHS legislated requirements

relevant workplace documentation, including:

as marketed technical performance

industry technical standards

product quality endorsement standards

safety requirements

relevant workplace policies and procedures.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in suitable workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in suitable simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

relevant and appropriate materials, tools, facilities and equipment currently used in industry

resources that reflect current industry practices in relation to assessing compliance of electronic apparatus

applicable documentation, including workplace procedures, equipment specifications, regulations, codes of practice and operation manuals.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Assessing electronic apparatus compliance must include at least two different electronic apparatus of the following:

audio amplifiers

radio and televisions receivers

video displays

audio and video recording/replay devices

two-way radios

cell phones

instrumentation devices

control devices

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including:

implementing workplace procedures and practices

using risk control measures

applying sustainable energy principles and practices

identifying electronic apparatus compliance certification/approval specifications

interpreting compliance documents

setting up and conducting appropriate examinations, inspections and tests

evaluating electronic apparatus compliance

identifying non-compliance defects

reporting examination and test results and non-compliance issues clearly and accurately

dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment

completing apparatus assessment and documenting results

preparing to evaluate electronic apparatus certification/approval specifications compliance.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

compliance certification, including:

the purposes of certification of equipment

the parties involved in the assessment/testing and certification of equipment

the scheme for recognition of assessment/testing and certification

compliance testing and assessment of electronic apparatus equipment, including:

types of assessment, inspection and tests

test set-ups and workplace procedures

recording and reporting requirements of conformity assessment

preparation required to assess equipment for compliance with industry standards, including:

documentation required prior to conducting conformity assessment

tests necessary to establish that an item of equipment conforms with relevant industry standards

relevant compliance certification/approval specifications

relevant job safety assessments or risk mitigation processes, including:

safe working practices

relevant manufacturer specifications

relevant technical industry standards, regulations, codes of practice for electronic apparatus and WHS/OHS legislated requirements

relevant workplace documentation, including:

as marketed technical performance

industry technical standards

product quality endorsement standards

safety requirements

relevant workplace policies and procedures.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in suitable workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in suitable simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

relevant and appropriate materials, tools, facilities and equipment currently used in industry

resources that reflect current industry practices in relation to assessing compliance of electronic apparatus

applicable documentation, including workplace procedures, equipment specifications, regulations, codes of practice and operation manuals.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
WHS/OHS processes and workplace procedures for a given work area are identified, obtained and applied 
 
 
 
 
 
WHS/OHS risk control measures and workplace procedures for carrying out evaluation work are followed 
 
 
 
 
 
 
 
WHS/OHS work completion risk control measures and procedures are followed 
 
 
 

Forms

Assessment Cover Sheet

UEEEC0005 - Assess electronic apparatus compliance
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEEEC0005 - Assess electronic apparatus compliance

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: