Assessor Resource

UEENEEE124A
Compile and produce an energy sector detailed report

Assessment tool

Version 1.0
Issue Date: March 2024


2)

This competency standard is suitable for employment-based programs under an approved contract of training at the AQF level of the qualification in which the unit is first packaged or higher.

The unit may be selected as an elective from the relevant schedule (see qualification packaging rules) provided that all prerequisite units are undertaken or addressed through recognition processes.

This unit may be included in a skill set provided that it is listed in the schedule of electives (see Qualification Framework) and all prerequisite units are undertaken or addressed through recognition processes.

Delivery and assessment of this unit should be undertaken within regard to the requirements of License to Practice (1.2 above), Prerequisite Competencies and Literacy and Numeracy skills (2 above) and the recommendations for concurrent assessment and relationship with other units (9.5 below).

Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships.

Note:

1. Compliance with permits may be required in various jurisdictions and typically relates to the operation of plant, machinery and equipment such as elevating work platforms, powder operated fixing tools, power operated tools, vehicles, road signage and traffic control and lifting equipment. Permits may also be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.

2. Compliance may be required in various jurisdictions relating to currency in First Aid, confined space, lifting, risk safety measures etc.

1)Scope:

1.1) Descriptor

This unit covers complying and producing an energy sector report. It encompasses determining the safety requirements are met and all regulatory responsibilities are adhered to. The person competent in this unit must demonstrate an ability to identify information sources and collect and analyse and format information applicable to the electrotechnology industry and produce a report as required.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Prerequisite Unit(s)

4)

Competencies

4.1)

There are no prerequisite competencies for this unit.

Literacy and numeracy skills

4.2)

Participants are best equipped to achieve competency in this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 ‘Literacy and Numeracy’

Reading

5

Writing

5

Numeracy

5


Employability Skills

5)

This unit contains Employability Skills

The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

9) The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of the unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be ‘rich’ in nature to minimise error in judgment.

Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites must be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines – UEE11’. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices, including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit. It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements.

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below:

Compile and produce an energy sector report as described in 8) and including:

A

Typical organisation policies and procedures.

B

Access to a report brief to established report parameters.

C

Access to appropriate person(s) to establish report requirements.

D

Establishing the scope and parameters of the report.

E

Determining the impact of other related works.

F

Developing design brief incorporating scenarios and all requirements.

G

Appropriate computer application.

H

Identifying competencies required for the report.

I

Documenting report proposal.

J

Negotiating alterations to the proposed report successfully.

Note:
Successful completion of relevant vendor training may be used to contribute to evidence on which competency is deemed. In these cases the alignment of outcomes of vendor training with performance criteria and critical aspects of evidence shall be clearly identified.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed in this unit.

These should be used in the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment, conditions for assessment must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to compiling and producing an energy sector report.

Method of assessment

9.4)

This unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

There are no concurrent assessment recommendations for this unit.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

8) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices and compiling and producing an electrotechnology report.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

KS01-EE124A Energy sector detailed report writing

Evidence shall show an understanding of analysis, decision making and reporting as they apply to engineering work functions to an extent indicated by the following aspects:

T1 Communicating with personnel encompassing:

Oral communications

Written procedures and work instructions

T2 Communicating with suppliers

T3 Communicating with customers

T4 Purpose and extent of maintaining work activities records in an enterprise encompassing:

Types of records for maintaining work activities in an enterprise

Methods for recording and maintaining work records

Work records required by regulation requirements

Using basic computer functions encompassing:

Starting up

Selecting application

Entering information

Saving

Printing

T5 Techniques of analysis encompassing:

use of appropriate sampling techniques to collect data.

types of data and classification.

effective questionnaire design

data collection errors.

frequency tables.

statistical diagrams – drawing and interpretation.

the general shape of a frequency distribution.

different types of diagrams.

mean time between failures calculations

T6 Summary of statistics encompassing:

measures of central tendency

measures of dispersion

a 5-point summary for a given data set, box and whisker plot distribution

data sets comparison using measures of centre and spread

the effect of outliers on measures of centre and spread

use computer programs or calculators to simplify calculations

T7 Correlation and regression encompassing:

bivariate data and scatter diagrams.

product-moment correlation coefficient calculation and interpretation.

difference between causation and correlation.

equations of regression lines from bivariate data with a calculator and line plotting on a scatter diagram.

using the equation of regression to make predictions in practical situations.

investigation of practical problems using correlation and regression.

T8 Investigation and reporting encompassing:

presentation of a well formatted report with a clearly stated aim.

using the internet to obtain relevant data.

description of the statistical method and design chosen to meet the aim of the investigation.

statistical analysis and results reporting.

evaluation and interpretation of the results of the investigation.

discussion of the investigation with reference to real world applications.

chronology of the investigation.

10) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit of competency describes work conducted by technical personnel who contribute to the conduct of energy sector report writing.

This unit of competency is typically performed by high-level technicians, working as part of a product/application/service research and/or design, development and implementation team. This generally involves working closely with a range of management and production/operations personnel and requires balancing the business and technical sides of the research process.

At this level, personnel should be able to interpret and explain sections/types of legislation, codes, regulations, Australian Standards and Intellectual Property rights that apply to the subject matter being reported upon. This unit of competency should be demonstrated in accordance with the organisations

Occupational Health and Safety and Workplace Safety policies and procedures

Goals, values, objectives, plans, systems and processes

Business and performance plans

Ethical standards

Client service standards

Quality and continuous improvement processes and standards

Standard Operating Procedures

Resources

Technical standards

Regulatory requirements

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
OHS processes and procedures for a given work area are identified, obtained and understood. 
Established techniques for report writing are reviewed are adopted in accordance with organisation policies. 
The scope of the report is evaluated and report parameters established using a formal evaluation/survey processes. 
Criteria from other related works impacting on the report are determined from other sources. 
Identify source and availability of information. 
Report is developed to include scenarios/requirements established in consultation with appropriate person(s), and regulatory requirements. 
Report is developed in collaboration with all relevant personnel. 
Competent persons are identified to assist in the compilation of the report. 
Report is reviewed against all inputs and adjusted to rectify any anomalies. 
Compile report in accordance with organisation policies and procedures. 
Compile and analyse research report information 
Report is presented and discussed with person(s) of higher authority. 
Alterations to the report resulting from the presentation/discussion are negotiated with person(s) of higher authority within the constraints of organisation policy. 
Final report is presented and approval obtained from appropriate person(s). 

Forms

Assessment Cover Sheet

UEENEEE124A - Compile and produce an energy sector detailed report
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

UEENEEE124A - Compile and produce an energy sector detailed report

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: