Assessor Resource

UEERA0039
Evaluate and report on building services energy management systems

Assessment tool

Version 1.0
Issue Date: May 2024


This unit involves the skills and knowledge required to evaluate and report on building services energy management systems, plant and machinery.

It includes working safely, setting up and conducting evaluation measurements, evaluating energy use from measured parameters, and reporting results, including recommending any resulting corrective actions.

The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c).

Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, skills and knowledge described in this unit require a relevant contract of training, such as an Australian Apprenticeship.

Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.

Permits may also be required for some work environments, such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

determining the extent of the evaluation

setting up and conducting appropriate examinations and tests

reporting evaluation, including recommendation for improving energy efficiency

dealing with unplanned events

applying environmental and sustainable energy principles and practices

applying relevant legislations, industry standards, codes of practice and regulations

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including:

applying safe working practices

hazard identification and reporting

implementing risk control measures

determining need to test or measure live work

implementing energy management procedures for a building

performing energy evaluation tests

preparing to evaluate and report on energy management.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

energy management fundamentals, safe working practices and relevant standards, codes and regulations, including:

typical energy sources and characteristics:

supply authorities

standard units of measurement

electricity

steam

hot water

high temperature hot water

town gas

liquefied petroleum gas (LPG)

solar

waste heat

petrol

diesel

energy usage:

office lighting

air conditioning systems

refrigeration systems

security systems

computer systems

standby/emergency systems

lifts and escalators

energy auditing process:

energy costs and tariffs

energy consumption

predicting future costs

plotting consumption trends

historical data

collecting information using surveys

comparisons of actual to recorded usage

energy balance

instrumentation

building management systems

estimating savings potential

system operation for energy efficiency:

types of systems

efficiency in building structures

operation of a vehicle fleet

proportion total energy consumption against individual systems

passive building design

preventative maintenance procedures

monitoring building management systems

operation of major and minor plant

inappropriate energy management procedures

building plant control systems

Australian Standards/local authority requirements

case studies

implementing energy management procedures for a building:

recording base year data

climatic conditions for locality

establishing energy costs and tariffs

building and systems surveys

payback period

survey analysis

energy conservation procedures

informing stockholders

recommendations and documentation

implementation issues

monitoring, evaluation and follow up

building management systems

building management systems, safe working practices and relevant standards, codes and regulations, including:

functions of a building management system:

autonomous functions

input/output (I/O)

general I/O

installation management items

energy management

risk management

information processing

objectives

building running costs

smoke control in accordance with AS 1668.1 The use of ventilation and air conditioning in buildings - Fire and smoke control in buildings

building management system hardware:

system architecture

communication devices

substations

personal computers

interfaces with other systems

input and output functions:

digital I/O

digital output with status feedback

analogue I/O

sensors

alarms

energy management:

night cycle

optimum stop/start

time and event programs

night purge

outside air percentage control

enthalpy control

power demand control

duty cycle

presence detection

lighting control

information processing functions:

computer systems

central system management

programs

system configuration and security

operator - machine interface

data points

risk and maintenance management:

system files

fire and intruder control

access control

building services, plant and machinery specifications

energy evaluation tests

relevant manufacturer specifications

relevant tools, equipment and testing devices

relevant WHS/OHS legislated requirements, including:

environmental and sustainable energy principles and practices

relevant workplace policies and procedures.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or other simulations

relevant and appropriate materials, tools, equipment and personal protective equipment (PPE) currently used in industry

applicable documentation, including workplace procedures, equipment specifications, regulations, codes of practice and operation manuals.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Evaluating and reporting on building services energy management systems must include at least the following

two different types of building services, plant and machinery

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

determining the extent of the evaluation

setting up and conducting appropriate examinations and tests

reporting evaluation, including recommendation for improving energy efficiency

dealing with unplanned events

applying environmental and sustainable energy principles and practices

applying relevant legislations, industry standards, codes of practice and regulations

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including:

applying safe working practices

hazard identification and reporting

implementing risk control measures

determining need to test or measure live work

implementing energy management procedures for a building

performing energy evaluation tests

preparing to evaluate and report on energy management.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

energy management fundamentals, safe working practices and relevant standards, codes and regulations, including:

typical energy sources and characteristics:

supply authorities

standard units of measurement

electricity

steam

hot water

high temperature hot water

town gas

liquefied petroleum gas (LPG)

solar

waste heat

petrol

diesel

energy usage:

office lighting

air conditioning systems

refrigeration systems

security systems

computer systems

standby/emergency systems

lifts and escalators

energy auditing process:

energy costs and tariffs

energy consumption

predicting future costs

plotting consumption trends

historical data

collecting information using surveys

comparisons of actual to recorded usage

energy balance

instrumentation

building management systems

estimating savings potential

system operation for energy efficiency:

types of systems

efficiency in building structures

operation of a vehicle fleet

proportion total energy consumption against individual systems

passive building design

preventative maintenance procedures

monitoring building management systems

operation of major and minor plant

inappropriate energy management procedures

building plant control systems

Australian Standards/local authority requirements

case studies

implementing energy management procedures for a building:

recording base year data

climatic conditions for locality

establishing energy costs and tariffs

building and systems surveys

payback period

survey analysis

energy conservation procedures

informing stockholders

recommendations and documentation

implementation issues

monitoring, evaluation and follow up

building management systems

building management systems, safe working practices and relevant standards, codes and regulations, including:

functions of a building management system:

autonomous functions

input/output (I/O)

general I/O

installation management items

energy management

risk management

information processing

objectives

building running costs

smoke control in accordance with AS 1668.1 The use of ventilation and air conditioning in buildings - Fire and smoke control in buildings

building management system hardware:

system architecture

communication devices

substations

personal computers

interfaces with other systems

input and output functions:

digital I/O

digital output with status feedback

analogue I/O

sensors

alarms

energy management:

night cycle

optimum stop/start

time and event programs

night purge

outside air percentage control

enthalpy control

power demand control

duty cycle

presence detection

lighting control

information processing functions:

computer systems

central system management

programs

system configuration and security

operator - machine interface

data points

risk and maintenance management:

system files

fire and intruder control

access control

building services, plant and machinery specifications

energy evaluation tests

relevant manufacturer specifications

relevant tools, equipment and testing devices

relevant WHS/OHS legislated requirements, including:

environmental and sustainable energy principles and practices

relevant workplace policies and procedures.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or other simulations

relevant and appropriate materials, tools, equipment and personal protective equipment (PPE) currently used in industry

applicable documentation, including workplace procedures, equipment specifications, regulations, codes of practice and operation manuals.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
WHS/OHS procedures are obtained and implemented in accordance with workplace procedures 
 
 
 
 
WHS/OHS risk control measures and workplace procedures for carrying out the work are followed 
 
 
 
 
 
 
WHS/OHS work completion risk control measures and procedures are followed 
 
 
 

Forms

Assessment Cover Sheet

UEERA0039 - Evaluate and report on building services energy management systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEERA0039 - Evaluate and report on building services energy management systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: