UEGNSG326A - Coordinate and monitor staff and contractors
Assessor Resource
UEGNSG326A Coordinate and monitor staff and contractors
Assessment tool
Version 1.0 Issue Date: April 2024
2)
This competency standard shall apply to any basic and safe work site where Gas Industry operations occur. It could also apply, where applicable to other workplaces in the electricity supply industry (transmission and distribution and generation), the electrotechnology industry and the water industry, subject to all Occupational Health and Safety and duty of care requirements being met for the workplace.
1) Scope:
1.1) Descriptor
This Competency Standard Unit covers the coordination and monitoring of staff and contractors working on a transmission pipeline construction worksite. It requires the application of skills and knowledge to provide information, guidance and direction to staff and contractors in the conduct of their duties. It does not cover the high levels of technical expertise required to actually perform the services but focuses on the key knowledge and skills required to supervise, coordinate and monitor the process from a work supervision and contractor management perspective. The competency standard is applied against the procedures found under the latest version of AS 2885.1 and AS 2885.4 in a Gas Transmission Pipeline Construction context.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
Prerequisite Unit(s)
4)
Competencies
4.1)
Granting of competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed:
Nil
Literacy and numeracy skills
4.2)
Participants are best equipped to achieve this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 ‘Literacy and Numeracy’
Reading
4
Writing
4
Numeracy
4
Employability Skills
5)
This unit contains Employability Skills
The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
9) The Evidence Guide forms an integral part of this Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.
Overview of Assessment
9.1)
Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with industry and regulatory policy in this regard.
Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.
The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.
Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included in the Assessment Guidelines of this Training Package.
Critical aspects of evidence required to demonstrate competency in this unit
9.2)
Before the critical aspects of evidence are considered all prerequisites shall be met.
Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines — UEG11’. Evidence shall also comprise:
A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:
Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range
Apply sustainable energy principles and practices as specified in the Performance Criteria and range
Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner’s performance outcome is reported in accordance with the preferred approach; namely a percentile graded result
Demonstrate an appropriate level of employability skills
Conduct work observing the relevant Anti discrimination legislation, regulations, polices and workplace procedures
Demonstrate performance across a representative range of contexts from the prescribed items below:
Range of tools/equipment/procedures/workplace
Group No
The minimum number of items on which skill is to be demonstrated
Item List
A
All
Interpret technical drawings and symbols
Emergency response procedures in place
Schedules communicated/coordinated to persons
Carry out job safety analysis and inductions
Obtain work permit
Relevant knowledge of the latest version of AS 2885.1 and AS 2885.4 Australian and New Zealand Standard
Apply basic planning skills
Work utilising relevant OHS and environmental legislation, regulations, codes of practice, policies and procedures
Maintain a safe clean workplace
Contractor management
Communicate effectively in the workplace
Problem solving skills
Maintain documentation
Planning and organising
B
At least one occasion
Deal with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items
Context of and specific resources for assessment
9.3)
This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:
OHS policy and work procedures and instructions.
Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this Unit.
Appropriate environmental regulation and work practices.
Appropriate organisational requirements.
Appropriate work environment, equipment and tools.
In addition to the resources listed above in context of and specific resources for assessment, evidence should show demonstrated competency in supervising and monitoring contract staff.
Assessment of this competency must also be undertaken in either an actual workplace or under a simulated work environment. Assessment must also integrate the employability skills.
Method of assessment
9.4)
This Unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’.
Note: Competent performance with inherent safe working practices is expected in the Industry to which this Unit applies. This requires that the specified Essential Knowledge and Associated Skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the Essential Knowledge and Associated Skills described in this unit.
Concurrent assessment and relationship with other units
9.5)
There are no recommended concurrent assessments with this unit.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
8) This describes the essential skills and knowledge and their level, required for this unit.
Evidence shall show that knowledge has been acquired of safe working practices for using of equipment and tools to perform work in a transmission pipeline construction industry work environment.
All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.
KS01-G326A
Transmission pipeline staff and contractor
G 2.3.16
Transmission pipeline construction OHS, environmental and cultural legislative and regulatory requirements
Evidence shall show an understanding of the practical work requirements embedded in the OHS, Environmental and Cultural Legislation and Regulations.
For OHS:
Complete Risk Assessment forms such as Work Permits and JHA’s, JSA’s, JSEA’s, SWM’s etc Hazard Identification
Manual handling
Basic First Aid
MSDS
Understanding how to apply control measures
Emergency Response
Signage
Licenses and tickets
Working at heights
Awareness of confined spaces
For Environmental:
Weed mitigation
Erosion control
Emission laws
Quarantine laws
Licenses
Permits
For Cultural and Heritage Awareness:
Cultural and heritage awareness tagging
Understanding the role of the cultural monitor
Uncovering of cultural/heritage artefacts
Understanding heritage and cultural issues
Understanding legislative and regulatory requirement applicable in working situations
G 2.3.18
Effective communication with third party asset owners in exposing, surveying and reinstating their assets safely
Evidence shall show an understanding of how to effectively communicate with third party asset owners about:
exposing, surveying and re-instating their assets safely and effectively
G 2.3.21
Knowledge of ASNZ 2885 for transmission pipeline construction crews
Evidence shall show an understanding of the relevant sections of:
ASNZ 2885 dependent on the endorsement area. eg Hydro test only needs 2885.5.
G 2.3.22
Effective communication on a gas transmission pipeline construction site (between operators and ground crew)
Evidence shall show an Knowledge of on-site pipeline construction communication strategies including:
hand signals,
satellite phones
radios
G 4.1.3
Communicate effectively in the Gas Industry at a supervisory level
Evidence shall show an understanding of communication techniques required in supervisory roles in the Gas Industry, indicated by the following:
communicate effectively with a variety of Gas Industry stakeholders, using strategies for dealing with difficult situations. The communication includes oral, written or electronic communications, : with various stakeholders including:
workplace colleagues
workplace managers
relevant customers and suppliers
regulatory bodies
property/land owners (including traditional land owners) and tenants
emergency response organisations
G 4.1.21
Drug and alcohol awareness and effects on the workforce
Evidence shall show an understanding of dealing with drug and alcohol abuse in a transmission construction worksite and other applicable gas industry workplaces. It includes:
Knowledge and capability of identifying a worker who is affected by abuse of drugs or alcohol.
Knowledge and understanding of relevant enterprise procedures for safely removing drug and alcohol affected workers from the worksite.
Application of relevant policies and procedures
G 4.1.22
Knowledge of the capability and capacity of gas industry transmission pipeline construction plant and equipment across variable terrain and environment
Evidence shall show an understanding of how plant and equipment reacts in a variety of terrain and climates including:
dry weather versus humid weather, and in different geographical environment eg sand versus mixture of sand and rock and purely rock.
Application of engineering requirements for use of construction plant and equipment across variable terrain and environment
G 4.1.23
Dealing with contingencies in a remote area
Evidence shall show an understanding of survival techniques in remote areas including:
survival techniques in remote areas eg running out of fuel/communications equipment, minor maintenance requirements.
Planning for contingencies in remote areas
G 4.1.24
Loading capacity and scheduling requirements for the delivery of plant and equipment on vehicles across state roads and tracks
Evidence shall show an understanding of loading capacity including:
Understanding of loading capacity and scheduling requirements for the delivery of plant & equipment on vehicles across state roads and tracks.
Planning for contingencies eg rain, floods, breakdowns etc
G 5.1.2
Apply problem solving, decision making and conflict resolution techniques
Evidence shall show an understanding and application of problem solving, decision making and conflict resolution techniques in a Gas Industry environment, indicated by the following:
problem solving and decision making techniques
the decision making environment
group decision making
guidelines for making decisions
decision making aids and support systems
negotiation with internal and external stakeholders
the nature of negotiation
strategy and tactics of bargaining
pre-negotiation essentials
communication in negotiation
resolve conflict with internal or external stakeholders
dealing with negotiation breakdowns
social context of negotiation
power in negotiation
ethics in negotiation.
10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.
This Unit shall be demonstrated in relation supervision and monitoring contract staff
The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section of this volume and form an integral part of the Range Statement of this unit:
Access preparation
Permit to Work
Permit to Access Land
Approval for construction
Stake holder approvals
Verification and identification of third party assets
Environmental and cultural heritage controls
Maps and Drawings
Established Procedures
PPE and First Aid equipment
Resources
Records/documentation
Safe working procedures
Relevant Persons
Traffic Control
Assessing risk
Competency
Interpersonal skills
Plant and Equipment used in Transmission Pipeline Construction
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Work schedule(s), including drawings, plans, requirements, established procedures and material lists are detailed, analysed if necessary by site inspection and the extent of the preparation of the work determined for planning and coordination
Contractor obligations such as relevant insurance requirements and OHS/plant requirements are identified and managed in accordance with established company procedures
Work is prioritised and sequenced for the most efficient and effective outcome following consultation with others for completion within acceptable timeframes to a quality standard and in accordance with established procedures
Risk control measures are identified, prioritised and evaluated against the work schedule
Relevant requirements and established procedures for the work are communicated to all persons and identified for all work sites
OHS, environmental, cultural and sustainable energy policies and procedures are obtained and confirmed for the purposes of the work performed and communicated
Relevant work permits are checked to ensure that work performed is done according to requirements and established procedures
Resources including persons, equipment, tools and personal protective equipment required for the job are identified and scheduled in accordance with project management plans
Contractual requirements, such as qualifications of personnel to perform the work, competency of the contractor, site induction and condition of equipment are confirmed
Confirmation of adequate access for work crews to first aid personnel and amenities according to requirements
Liaison and communication issues with authorised persons, authorities, clients and land-owners are resolved
Persons participating in the work are fully briefed and respective responsibilities coordinated and authorised where applicable in accordance with established procedures
Site is prepared according to work schedule and to minimise risk and damage to property, commerce and individuals in accordance with established procedures
Road signs, barriers and warning devices are positioned in accordance with requirements
OHS policies and procedures and safe work practices are followed by all personnel to eliminate or minimise incidents and hazards
Lifting, climbing, excavations, trenches, or aloft, and use of power tools, techniques and practices are safely followed and currency according to requirements confirmed
Essential Knowledge and Associated Skills is applied to ensure completion in an agreed timeframe and to quality standards with a minimum of waste according to requirements
Staff and contractor activity is carried out in accordance with the work schedule and to established procedures
Hazard warnings and safety signs are recognised and hazards are assessed and OHS risks are reported according to established procedures
Solutions to non-routine problems are identified and actioned using acquired Essential Knowledge and Associated Skills according to requirements
Known solutions to a variety of problems are applied using acquired Essential Knowledge and Associated Skills
First Aid and other related work procedures are performed according to requirements and established procedures.
Ongoing checks of quality of the work are undertaken in accordance with requirements and established procedures to ensure a quality outcome is achieved.
Inspection of the job is checked against works schedule to determine conformance with requirements, anomalies are reported in accordance with established procedures
Accidents and injuries are reported and followed up in accordance with requirements and established procedures
Waste materials are safely disposed of and the work site is rehabilitated, cleaned up and made safe in accordance with given instructions and established procedures
Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures
Relevant work permit(s) are signed off and equipment is returned to service in accordance with requirements
Data is accurately recorded and work completion records, reports, drawings, documentation and any other relevant information is finalised and processed according to established procedures
Forms
Assessment Cover Sheet
UEGNSG326A - Coordinate and monitor staff and contractors
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
UEGNSG326A - Coordinate and monitor staff and contractors
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent