Assessor Resource

UEGNSG602B
Load, discharging LPG by road tanker

Assessment tool

Version 1.0
Issue Date: March 2024


2)

This competency standard shall apply to any basic and safe work site where Gas Industry operations occur. It could also apply, where applicable to other workplaces in the electricity supply industry (transmission and distribution and generation), the electrotechnology industry and the water industry, subject to all Occupational Health and Safety and duty of care requirements being met for the workplace.

1) Scope:

1.1) Descriptor

This Competency Standard Unit covers the loading and discharging of LPG by road tanker for the distribution of LPG. Included are appropriate persons; tools and equipment for LPG; loading and discharging of LPG; meeting Australian Dangerous Goods Code; regulations/statutes; standard operating procedures and guidelines followed for emergency procedures; AS 1596 or its replacement applies.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Prerequisite Unit(s)

4)

Competencies

4.1)

Granting of competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed:

Nil

Literacy and numeracy skills

4.2)

Participants are best equipped to achieve this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 ‘Literacy and Numeracy’

Reading

3

Writing

3

Numeracy

3


Employability Skills

5)

This unit contains Employability Skills

The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

9) The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practiced. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines — UEG11’. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range

Apply sustainable energy principles and practices as specified in the Performance Criteria and range

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner’s performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment

Demonstrate an appropriate level of employability skills

Conduct work observing the relevant Anti discrimination legislation, regulations, polices and workplace procedures

Demonstrate performance across a representative range of contexts from the prescribed items below.

Range of tools/equipment/procedures/workplace

Group No

The minimum number of items on which skill is to be demonstrated

Item List

A

All

Pipes

Hoses

Valves and gauges

Operate other associated equipment within its limitations and to requirements

B

At least 7

Take into account:

Curfews

Number of customers

Volume of LPG to be delivered

Duration of shift

Distance to be travelled

Equipment type

Site access

Weather conditions

Delivery area is checked for ignition sources and other hazards

Local environment

C

All

Standard Operating Procedures

Australian Dangerous Goods Code

Emergency procedures and response action

AS1596 or replacement

Working knowledge of AS 2865

State Regulations/Statutes/Permits

D

All

Work utilising relevant OHS legislation, regulations, codes of practice, policies and procedures

Maintain a safe and clean workplace

Work safely with hazardous materials and equipment

Job safety analysis

Apply safe manual handling techniques

Respond to emergency situations

Communicate effectively in the workplace

Apply basic planning and job completion skills

E

At least one occasion

Deal with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this Competency Standard Unit.

Appropriate environmental regulation and work practices.

Appropriate organisational requirements.

Appropriate work environment, equipment and tools.

In addition to the resources listed above, in Context of and specific resources for assessment, evidence should show demonstrated competency in loading, discharging LPG by road tanker.

Assessment of this competency must also be undertaken in either an actual workplace or under a simulated work environment. Assessment must also integrate the employability skills.

Method of assessment

9.4)

This Competency Standard Unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’.

Note: Competent performance with inherent safe working practices is expected in the Industry to which this Competency Standard Unit applies. This requires that the specified Essential Knowledge and Associated Skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and associated skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

There are no recommended concurrent assessments with this unit, however in some cases efficiencies may be gained in terms of learning and assessment effort being concurrently managed with allied Competency Standard Units where listed.

UEGNSG102B

Carry out work activities in a utilities industry work environment

UEENEEE101A

Apply Occupational Health Safety regulations, codes and practices in the workplace

UEGNSG104B

Comply with environmental policies and procedures

UEGNSG105B

Establish the work site


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

8) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices for loading, discharging of LPG by road tanker.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

KS01-G602B

Load, discharge tanker

G 2.1.1

Work in the gas sector

Evidence shall show an understanding of how work is conducted in the Gas Industry, specifically:

The Gas Industry in Australia

Australian gas resources

Types of gas and uses

Combustion.

G 2.1.2

Identify roles of statutory authorities

Evidence shall show an understanding of the roles of statutory authorities (government agencies, both State and Federal) that operate in the Gas Industry, including identifying:

Statutory bodies

Roles of statutory bodies

Employer and employee responsibilities to statutory bodies.

G 2.1.3

Identify employment roles and responsibilities

Evidence shall show an understanding of the roles of major groups in the Gas Industry, that is employers and employees, including:

The role of the employer

Industry associations

Employer obligations to safety

Identification of disadvantaged and minority groups in Australian society

Employers obligations to persons from disadvantaged and minority groups

Employers obligations to occupational health and safety

The role of commonwealth and state training regulatory authorities and industry skills councils and state training advisory bodies

Roles and responsibilities of gas industry employees

The employment contract

Working to safety requirements

Work according to lawful commands

Belonging to employee organisations

How to work with people from disadvantaged and minority groups

Understanding the employees obligations to occupational health and safety

Sources of support.

G 2.1.4

Apply relevant OHS regulations, policies and procedures

Evidence shall show an understanding of the basic workplace health and safety legislation and how this applies to individuals in a Gas Industry workplace, indicated by the following:

Employer's responsibilities to relevant OHS legislation

Employee's responsibilities to OHS legislation and organisation's policies and procedures

OHS policies and procedures at the worksite.

Australian Standards, guidelines and codes of practice

G 2.1.5

Work safely in the gas industry by reducing risk and using correct PPE

Evidence shall show an understanding of how to work safely in the gas industry indicated by the ability to:

Correctly interpret and comply with Safety Signs including workplace Hazards, Warnings and PPE requirements

Correctly interpret gas markers

Identify the correct PPE required for work in the Gas Industry

Locate and comply with procedures for correctly checking, maintaining and storing PPE

Apply the process of Hazard identification, Risk assessment and Control

Complete Risk Assessment forms such as Work Permits and JHA’s, JSA’s, JSEA’s, SWM’s etc

Report workplace hazards

G 2.1.6

Work safely with hazardous materials and equipment

Evidence shall show an understanding of what constitutes hazardous materials and the equipment and processes used to safely work with these indicated by the following:

Identify hazardous materials and equipment

Location and purpose of Material Safety Data Sheets (MSDS)

Read, interpret and discuss MSDS

Knowledge of methods for safe disposal of hazardous waste materials

Read, interpret and discuss relevant manufacturer's specifications

Use and dispose of hazardous materials and equipment safely

Use of spill kits and PPE

G 2.1.7

Apply safe manual handling techniques in the workplace

Evidence shall show an understanding of manual handling and how to apply this knowledge to handling heavy and awkward objects in a Gas Industry workplace, specifically:

Principles for managing manual handling

Characteristics and types of safe manual handling

Safe manual handling techniques

Manual handling and risk management

G 2.1.8

Control traffic at the work site

Evidence shall show knowledge and skills in coordinating traffic flow at a workplace where traffic control is required, that is, where work is conducted on or near a road, indicated by the following:

Read and interpret relevant traffic authority regulations for traffic control at a worksite

Identify signs and devices required to control pedestrians and traffic at a worksite depending on traffic flow volumes

Apply techniques for controlling pedestrians and traffic at various worksites

Use procedures for monitoring traffic controls

Set up and monitor pedestrian and traffic controls

G 2.1.9

Respond to emergency and accident situations

Evidence shall show knowledge and skills in dealing with emergency or accident situations at a Gas Industry workplace, indicated by the following:

Situations of accidents and emergency

Comply with procedures for accidents and incidents

Correct use of emergency equipment and procedures for a fire

Correct use of breathing apparatus

Correct use of gas detectors/oxygen monitoring devices

Correct use of emergency equipment and procedures for a gas leak or vapour emission

Report emergencies and accidents

G 2.1.14

Read and interpret Gas Industry documents

Evidence shall show an ability to read and interpret Gas Industry documents indicated by the following:

Understand and use signs, symbols terminology and legends as used in gas industry procedures and documents

Identify, locate and implement gas industry standards, policies and procedures

Interpret and read basic drawings and diagrams

G 2.1.15

Complete workplace forms, and reports

Evidence shall show an ability to complete routine Gas Industry forms, memos and reports either written or electronic, indicated by the following:

Identify, locate, interpret and use workplace forms, and reports

Enter the required information accurately on gas industry forms and reports

G 2.1.16

Identify requirements of work activity

Evidence shall show ability to:

Clarify expected outcomes of a work activity in a Gas Industry workplace

Receive, clarify and respond to verbal work instructions for work activity

Interpret and discuss an organisation's policies, quality requirements and specifications for work activity

G 2.1.17

Apply basic planning skills

Evidence shall show a demonstrated ability to apply basic planning skills in a Gas Industry workplace, indicated by the following:

Develop checklists of tasks

Prioritise tasks

Identify resources required to complete tasks safely and efficiently

Identify resource or scheduling conflicts and apply solutions

Develop time lines to complete tasks

G 2.1.18

Conduct tasks to complete work activities

Evidence shall show ability to organise the activities to complete a job in a Gas Industry workplace, indicated by the following:

Locate and organise equipment, tools and machinery required to complete tasks safely and efficiently

Complete tasks according to planned sequences and within appropriate timeframes

Understand quality assurance and work according to established and standard operating procedures

G 2 1.19

Review work activities

Evidence shall show an ability to review work activities undertaken in a Gas Industry workplace, indicated by the following:

Check work activities against a work plan

Seek feedback on the outcome of work activities with appropriate persons

Report outcomes of work activities in writing or orally according to enterprise procedures

G 2.1.20

Customer relations

Evidence shall show an understanding of the requirements for providing good customer relations to Gas Industry stakeholders, indicated by the following:

Notify stakeholders of activities

Communicate with stakeholders within scope of responsibilities

Refer stakeholders to appropriate parties

Demonstrate understanding of ring fencing requirements (if applicable)

Keep the customer informed on job progress

Provide good customer relations

G 2.1.21

Undertake problem solving

Evidence shall show an understanding of the requirements to undertake basic problem solving in a Gas Industry workplace, indicated by the following:

Demonstrate problem solving and diagnostics methodology

Identify possible solutions

Recommend probable solutions and

Apply basic problem solving techniques

G 2.1.22

Operate in confined spaces

Evidence shall show an understanding of the requirements to recognise and operate in confined spaces in a Gas Industry workplace, indicated by the following:

Knowledge of the requirements of Legislation, Regulations, Australian Standards and enterprise specific procedures for safe working in confined spaces

Ability to recognise what a confined space is and the entry safety requirements

Ability to understand and comply with manufacturers’ guidelines for the safe use of PPE used in confined spaces

Understand how and when to use gas detectors for confined spaces entry

Understand how and when to use breathing apparatus and rescue and recovery equipment

Note: A confined spaces entry ticket would satisfy and exceed the requirements of this EKAS clause

G 2.1.25

Protect the environment

Evidence shall show an understanding and ability to perform work in the gas industry in a manner that protects the environment indicated by the following:

Understanding of the relevant Commonwealth/State/Territory environmental legislation, regulations and codes of practice

Understanding of employee's and employer's responsibilities to relevant environmental legislation, regulations and codes

Understanding and compliance with enterprise procedures for flora control

erosion control

fauna control

the protection of indigenous and cultural heritage sites

Understanding the role of regulatory bodies in monitoring environmental activities, risk and incident compliance

Understanding community expectations for protecting the environment

Correct use of environment protection procedures, records, inspections and incident reporting

Identifying environmental hazards

Assessing environmental risks

Implementing environmental control measures

Ability to respond to workplace environmental incidents

Note: Environmental damage can be caused by chemicals, oil, water contamination, carcinogenic agents, gases, dusts, waste contamination and noise

G 2.1.26

Communicate in the workplace

Evidence shall show an understanding and ability to communicate effectively in a Gas Industry work team indicated by the following:

Effective use oral and written communications methods to achieve work related outcomes and solutions.

Effectively receive, interpret and respond to workplace information and instructions

Effectively convey and report work related information to fellow workers and customers

Interact with fellow workers in a socially and culturally appropriate manner

G 2.6.1

Occupational Health and Safety for working with LPG

Evidence shall show an understanding of the specific OHS and working procedures required to work with LPG gas, indicated by awareness of:

OHS and environmental legislation

Australian Dangerous Goods Code (ADG)

inspection procedures

properties of LPG

operational capacity of safety equipment on tankers

standard operating procedures for dealing with LPG

position and manoeuvrability of tankers

appropriate ability to read meters

and understanding of manufacturer's specifications

out of gas procedures.

G 2.6.3

Operate equipment within its limitations

Evidence shall show an understanding of the specific knowledge required to operate equipment within its limitation in the LPG environment, indicated by the following:

identify and understand the equipment used in the transporting of LPG

use equipment for storing and transporting LPG.

G 2.6.4

Adhere to schedule

Evidence shall show an understanding of the specific knowledge required to operate equipment within its limitation in the LPG environment, indicated by the following:

identify and understand the equipment used in the transporting of LPG

use equipment for storing and transporting LPG.

G 2.6.5

Communication in an LPG environment

Evidence shall show an understanding of the specific communication knowledge required in an LPG environment, specifically:

understanding customer requirements

understanding company delivery procedures

understanding company billing processes.

10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

This Competency Standard Unit shall be demonstrated in relation to loading, discharging LPG by road tanker.

The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section of this volume and form an integral part of the Range Statement of this unit:

Appropriate persons (2)

Tools and equipment for LPG

Loading and discharging LPG

Standard operating procedures

Records/documentation (2)

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work instructions are received and confirmed 
Relevant requirements and established procedures are followed for the work to be performed and are discussed with all persons to establish and confirm the work schedule 
OHS, environmental and sustainable energy policies and procedures to be followed for the work to be performed are received and confirmed 
Suggestions to assist with the loading and discharging of LPG by road tanker are made to others involved in the work 
Hazards are identified, OHS risks assessed and control measures are prioritised, implemented and monitored including emergency exits kept clear according to established procedures 
Scope of responsibility under the relevant work permit are received and confirmed according to requirements and established procedures with relevant persons 
Materials necessary to complete the work, including equipment, tools and personal protective equipment are obtained and in working order according to established procedures 
Relevant responsibilities associated with First Aid and other related work safety procedures at the worksite are confirmed in accordance with requirements and established procedures to ensure safety measures and followed in the instance of an incident. 
Client issues are referred to appropriate persons in accordance with industry and community standards 
Site is prepared according to given instructions and the work schedule for a quality outcome and to minimise risk and damage to property, commerce and individuals in accordance with established procedures 
OHS policies and procedures and safe work practices are followed to eliminate or minimise incidents and hazards 
Lifting, climbing, working in confined spaces or aloft, and use of power tools, techniques and practices are safely followed in accordance with given instructions and according to requirements confirmed to eliminate the prospects of incidents 
Tanker is positioned and operational knowledge for the loading and discharging of LPG by road tanker is confirmed to ensure completion in an agreed timeframe and to quality standards with a minimum of waste according to requirements and established procedures 
The loading and discharging of LPG by road tanker is carried out in accordance with given instructions and established procedures 
Hazard warnings and safety signs are recognised and hazards and assessed OHS risks are reported to the immediate authorised persons for directions according to established procedures 
Customer requirements for non-routine events are referred to the immediate authorised persons for directions according to established procedures 
Operational knowledge of the loading of tankers and the discharge of LPG is applied 
Problems associated with the loading and discharging of LPG by road tanker are dealt with using acquired known solutions and skills related to routine procedures to ensure work instructions and established procedures are met 
Ongoing checks of quality of the work are undertaken in accordance with given instructions and established procedures 
Work undertaken is checked against work schedule and anomalies reported to authorised persons in accordance with established procedures 
Accidents and incidents are actioned and reported to authorised persons in accordance with established procedures 
Work site is rehabilitated, cleaned up and made safe in accordance with given instructions and established procedures 
Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures 
Appropriate persons are notified of work completion according to established procedures 
Records are maintained and work completion records, report forms and data sheets are completed accurately in accordance with given instructions and established procedures 

Forms

Assessment Cover Sheet

UEGNSG602B - Load, discharging LPG by road tanker
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

UEGNSG602B - Load, discharging LPG by road tanker

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: