Assessor Resource

UEPMNT201A
Carry out routine work activities in an electricity supply industry generation environment

Assessment tool

Version 1.0
Issue Date: March 2024


2)

This competency standard is suitable for school based and employment-based programs under an approved contract of training at the AQF level of the qualification in which the unit is first packaged or higher.

The unit may be selected as an elective from the relevant elective group (see qualification packaging rules) provided that all prerequisite units are undertaken or addressed through recognition processes.

This unit may be included in a skill set provided that it is listed in the schedule of electives (see Qualification Framework) and all prerequisite units are undertaken or addressed through recognition processes.

Delivery and assessment of this unit should be undertaken within regard to the requirements of License to Practice (3 below), Prerequisite Competencies and Literacy and Numeracy skills (4 below) and the recommendations for concurrent assessment and relationship with other units (9.5 below).

Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships.

1)Scope:

1.1) Descriptor

This unit covers undertaking scheduled routine work activities in the electricity supply industry generation sector

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Prerequisite Unit(s)

4)

Competencies

4.1)

Granting of competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed.

Where pre-requisite pathways have been identified. All competencies in the Common Unit Group must have been completed.

Common Unit Group

Unit Code

Unit Title

UEENEEE101A

Apply Occupational Health and Safety regulations, codes and practices in the workplace

Literacy and numeracy skills

4.2)

Participants are best equipped to achieve this unit if they have reading, writing and numeracy skills indicated by the following levels. A description of what each level entails is provided in Section 2.3.1 Language, Literacy and Numeracy.

Reading

3

Writing

3

Numeracy

3


Employability Skills

5)

This unit contains Employability Skills.

The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

9) The Evidence Guide forms an integral part of this Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be ‘rich’ in nature to minimise error in judgment.

Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines, Section 3.1 of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated:

On at least two (2) occasions. In accordance with the "Assessment Guidelines” for the UEP12 Training Package.

Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframe typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range; and

Apply sustainable energy principles and practices as specified in the Performance Criteria and range; and

Demonstrate an understanding of the required skills and knowledge as described in this unit to such an extent that the learner's performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment; and

Demonstrate an appropriate level of employability skills; and

Conduct work observing the relevant Anti Discrimination legislation, regulations, policies and workplace procedures; and

Demonstrated performance across a representative range of contexts from the prescribed items below:

A

All of the following:

Receive a stock delivery and enter into the stock management system

Store stock using appropriate work, health and safety practices

Retrieve a stock item and check it out of the stock management system

B

All of the following:

Clean up an oil spill

Clean up a grease spill

Retrieve an MSDS for a cleaning solvent

C

All of the following:

Grease a bearing

Refill greasers

D

All of the following:

Deal with an unplanned event by drawing on essential knowledge and skills to provide appropriate solutions.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this unit.

These should be used in the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment, conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to:

Carry out routine work activities in an electricity supply industry generation environment.

Method of assessment

9.4)

This unit shall be assessed by methods given in the Assessment Guidelines, Section 1.3 of this Training Package.

Note:

Competent performance with inherent safe working practices is expected in the Industry to which this competency standard unit applies. This requires assessment in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

There are no concurrent assessment recommendations for this unit.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

8) This describes the essential skills and knowledge and their level, required for this unit.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

KS01-PM201A

Routine work activities in an ESI generation environment

Evidence shall show that knowledge has been acquired of routine work activities in an ESI generation environment to the extent indicated by the following aspects:

T1. ESI generation

Coal fired electricity generation

Gas fired electricity generation

Gas turbine electricity generation

Oil fired electricity generation

Hydro-electricity generation

Co-generation and tri-generation systems

Bio-mass electricity generation

Large-scale photo-voltaic electricity generation

Large-scale wind generation

Other forms of large scale renewable electricity generation

Mix of electricity generation in the marketplace

T2. Workplace health and safety in the ESI generation industry

Electrical

Mechanical

Hydraulic

Pneumatic (pressurised air)

Steam

Toxic gases and chemicals used in the industry

T3. Overview of the electricity distribution network

Generators

Substations and switching yards

Transformers

Circuit breakers and switches/isolators

Common voltages

3-phase and single-phase electricity supply

Electricity distributors and electricity retailers

T4. Lubrication

Refilling of greasing systems

Checking oil levels

Confirming lubrication of components

T5. Cleaning

Excess grease

Dust

Oil

Water

Salt

Cleaning chemicals

Appropriateness of use

MSDS for cleaning products

Use of cleaning products in restricted spaces

Prohibited cleaning solvents

T6. Warehousing

Enterprise procedures for managing stock levels

Computer stock control

Loading and unloading stock and products

Shelving

Inward goods receiving

Manual handling

Trolleys

Enterprise communication protocols

10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

Large scale electricity plant is considered to be 10 kW and above

Scheduled servicing and maintenance activities may include assisting experienced technicians

Work areas requiring permits or licences are excluded from access unless accompanied by an appropriate and competent person

Greasing systems may be manual or automatic systems

Tools include spanners, screwdrivers, torque wrenches

Cleaning equipment includes rags, chemical cleaners, hoses and water cannons

Stock management systems include computer-based, internet, and paper-based enterprise systems and documents

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in the Glossaries, Section 2.1 of this Training Package.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Instructions for preparing the work activity are communicated and confirmed to ensure clear understanding. 
OHS policies and procedures are communicated and confirmed to ensure they are understood as they apply to the carrying out of the work. 
Tools, equipment and personnel protective equipment necessary for the work are identified, scheduled and checked to ensure they work correctly as intended and are safe to use in accordance with established procedures. 
Appropriate personnel are consulted to ensure the work is coordinated effectively with others involved. 
Resources and materials needed to do the work are confirmed, scheduled and obtained in accordance with established procedures. 
Schedule of work including practices for working safely are confirmed in accordance with instructions and requirements. 
OHS policies and procedures and safe work practices are followed to eliminate or minimise incidents. 
Schedule of work is followed to ensure work is completed in an agreed time, to a quality standard and with a minimum of waste. 
Knowledge of work practices applicable to the wind generation industry are applied to routine work activities. 
Further instructions are sought from appropriate personnel in the event of unplanned happenings or conditions. 
Ongoing checks of work quality are undertaken in accordance with instructions and requirements. 
Final checks are made to ensure the work conforms with instructions and to requirements. 
Appropriate personnel are notified of completion of the work. 
Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures. 
Work area is cleaned up and made safe and sustainable energy practices are followed. 
Appropriate records are updated in accordance with instructions and established procedures. 

Forms

Assessment Cover Sheet

UEPMNT201A - Carry out routine work activities in an electricity supply industry generation environment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

UEPMNT201A - Carry out routine work activities in an electricity supply industry generation environment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: