Assessor Resource

UETTDRCJ21A
Lay ESI electrical cables

Assessment tool

Version 1.0
Issue Date: March 2024


2)

This Competency Standard Unit is intended to augment formally acquired competencies. It is suitable for employment-based programs under an approved contract of training.

1)Scope:

1.1) Descriptor

This Competency Standard Unit covers the laying of cables for electrical purposes and includes the laying of ducts and/or conduit for such cables. It could include direct laying of cables in trenches, on racks, in troughs and /or in conduit or ducts. It also encompasses cable pulling methods, pulling tensions, minimum bending radii, reduction of frictional forces, use of supporting plant (e.g. dynamometers, rigging, winches), working on FRC, PVC, A/C ducted systems and the sealing of cables.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Prerequisite Unit(s)

4)

Competencies

4.1)

Granting of competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed.

Where pre-requisite pathways have been identified. All competencies in the Common Unit Group must be have been completed.

Common Unit Group

Unit Code

Unit Title

UEENEEE101A

Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEE107A

Use drawings, diagrams, schedules, standards, codes and specifications

UETTDREL11A

Apply sustainable energy and environmental procedures

UETTDREL16A

Working safely near live electrical apparatus

Literacy and numeracy skills

4.2)

Participants are best equipped to achieve this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 “Literacy and Numeracy”.

Reading

3

Writing

3

Numeracy

3


Employability Skills

5)

The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

9) This provides essential advice for assessment of the unit of competency and must be read in conjunction with the performance criteria and the range statement of the unit of competency and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all component parts of this unit and, performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and, Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practiced. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the “Assessment Guidelines – UET12”. Evidence shall also comprise:

A representative body of performance criteria demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the performance criteria and range; and

Apply sustainable energy principles and practices as specified in the performance criteria and range; and

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner’s performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment; and

Demonstrate an appropriate level of employability skills; and

Conduct work observing the relevant Anti Discrimination legislation, regulations, policies and workplace procedures; and

Demonstrated performance across a representative range of contexts from the prescribed items below:

Range of tools/equipment/materials/procedures/workplaces/other variables

Group No

The minimum number of items on which skill is to be demonstrated

Item List

A

At least one of the following:

HV polymeric

HV paper insulated

B

At least one of the following:

LV polymeric

LV paper insulated

C

At least one of the following:

Direct lay

On racks

In conduits

D

At least one cable pulling methods of the following:

Stocking pulling

Bond pulling

Armour pulling

Nose pull attachments

E

At least two cable sealing methods of the following:

Heat shrinkable

Pre-stretched materials

Tin/lead wiping

Pre-moulded components

F

At least one cable cutting methods of the following:

Hydraulic cutters

Electric reciprocating

Motorised

Hand tools

G

At least four of the following:

Drum jacks

Winches

Spindles

Capstans

Bollards

Cable trailers

Rollers

Lubricants

Ropes

Bell mouths

Draw wires/rods

H

At least one occasion

Dealing with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this Competency Standard Unit.

In addition to the resources listed above, in context of and specific resources for assessment, evidence should show demonstrated competency working below ground, in limited spaces, with different structural/construction types and method and in a variety of environments.

Method of assessment

9.4)

This Competency Standard Unit shall be assessed by methods given in Volume 1, Part 3 “Assessment Guidelines”.

Note:

Competent performance with inherent safe working practices is expected in the Industry to which this Competency Standard Unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and associated skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

For optimisation of training and assessment effort, competence in this unit may be assessed concurrently with the following units:

UETTDRCJ22A

Install and maintain de-energised low voltage underground paper insulated cables.

UETTDRCJ26A

Install and maintain de-energised low voltage underground polymeric cables.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

8) Essential knowledge and associated skills (EKAS): This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of laying ESI electrical cables.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

KS01-TCJ21A Underground cable installation and safety

Evidence shall show an understanding of the installation of underground cable to an extent indicated by the following aspects:

T1 Requirements for the use of enterprise construction manuals, system diagrams/plans and drawings

T2 Safety precautions specific to the installation of underground cable encompassing:

Excavation and trench safety regulations

Gas detection procedures

Working in confined spaces

Personal protective equipment

Hazards for the use of LPG equipment for jointing of underground cable

Gas bottle testing procedures

Permit to work systems and isolation procedures

Trench excavation and reinstatement procedures

Rescue victims from confined spaces

Note: Examples include planning, identifying the procedures and establishing responses, developing techniques, involvement of external emergency services and practical demonstration/rehearsals of rescuing a person from confined spaces and emergency procedures for the rescue of an electric shock victim including CPR.

T3 Installation of underground cable procedures encompassing:

Types of tools and equipment

T4 Methods of cable handling encompassing:

Direct laid cables

Duct laid cables

Solid laid cables

Cables supported in cleats or hangers

Corrosion protection

Minimum bending radius of cables

T5 Methods of cable sealing encompassing:

Shorting of cables cores

Core of unterminated cables

Methods of protection from corrosion

Polymeric sheathed cables sealing with mastic lined

Heat shrink caps buried sealed ends

T6 Methods of installing conduits

T7 Procedures for the safe use of LPG equipment for cable jointing

T8 Traffic management

Note: Examples include purpose of traffic management and a power worker’s responsibilities in accordance with relevant statutory requirements and electricity supply industry requirements, demonstration of the procedure used to provide an effective traffic management scheme and the use of a two-way radio

T9 Procedures for purchasing/ordering items, removing/dispatching items, stocktaking, and record keeping

KS02-TCJ21A Underground cable construction

Evidence shall show an understanding of the construction and types of underground cables to an extent indicated by the following aspects:

T1 Safety precautions specific to handling underground cables

T2 Requirements for the use of enterprise manuals, system diagrams/plans and drawings

T3 Types and applications of underground cables

T4 Construction types and structures of underground cables

T5 Characteristics of different types of underground cables

T6 Ratings

10) This relates to the unit of competency as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This Competency Standard Unit shall be demonstrated in relation to the laying of cables for electrical purposes and includes the laying of ducts and/or conduit for electrical cables.

The unit includes the laying of cables direct in trenches, on racks, in troughs and /or in conduit or ducts.

It also encompasses cable pulling methods, pulling tensions, minimum bending radii, reduction of frictional forces, use of supporting plant (e.g. dynamometers, rigging, winches, etc), working on FRC, PVC, A/C ducted systems and the cutting and sealing of cables.

The following constants and variables included in the element/performance criteria in this unit are fully described in the Definitions Section 1 of this volume and form an integral part of the Range Statement of this unit:

Appropriate and relevant persons (see Personnel)

Appropriate authorities

Appropriate work platform

Assessing risk

Assessment

Authorisation

Confined space

Documenting detail work events, record keeping and or storage of information.

Drawings and specifications

Emergency

Environmental and sustainable energy procedures

Environmental legislation

Environmental management documentation

Established procedures

Fall prevention

Hazards

Identifying hazards

Inspect

Legislation

MSDS

Notification

OHS practices

OHS issues

Permits and/or permits to work

Personnel

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Works schedule(s), including drawings, plans, requirements, established procedures, and material lists, are received and confirmed, if necessary, by site inspection 
Relevant requirements and established procedures for the work are discussed with other personnel and identified for all work sites 
OHS policies and procedures related to requirements and established procedures for the laying of electrical cables are obtained and confirmed for the purposes of the work to be performed and communicated 
Work is prioritised and sequenced following consultation with others for completion within acceptable timeframes and in accordance with established procedures 
Hazards are identified, OHS risks assessed and control measures are prioritised, implemented and monitored including emergency exits kept clear according to established procedures. 
Relevant work permits are obtained to access and perform work according to requirements and/or established procedures. 
Resources including personnel, equipment, tools and personal protective equipment required for the job are obtained and confirmed in working order. 
Relevant personnel at work site are confirmed current in First Aid and other related work procedures according to requirements. 
Liaison and communication issues with other/authorised personnel, authorities, clients and land owners are resolved to carry out work where necessary. 
Site is prepared according to the work schedule and to minimise risk and damage to property, commerce, and individuals in accordance with established procedures. 
Personnel participating in the work, including plant operators and contractors, are fully briefed and respective responsibilities confirmed where applicable in accordance with established procedures. 
Traffic management plan is identified and implemented. 
OHS, sustainable energy and environmental principles and practices to reduce the incidents of accidents and minimise waste are followed in accordance with requirements and/or established procedures. 
Lifting, climbing, working in confined spaces and aloft, and use of power tools/equipment, techniques and practices are safely followed and, currency according to requirements confirmed. 
Essential knowledge and associated skills are applied in the safe laying of electrical cables to ensure completion in an agreed timeframe and, to quality standards with a minimum of waste according to requirements. 
Electrical cables are laid in accordance with the work schedule and requirements/established procedures. 
Hazard warnings and safety signs are recognised and hazards and assessed OHS risks are reported to the immediate authorised persons for directions according to established procedures. 
Unplanned events in the laying of electrical cables are undertaken within the scope of established procedures. 
Known solutions to a variety of problems are applied using routine procedures. 
Ongoing checks of quality of the work are undertaken in accordance with instructions and established procedures. 
Work undertaken is checked against works schedule for conformance with requirements and anomalies reported in accordance with established procedures. 
Accidents and/or injuries are reported in accordance with requirements/established procedures, where applicable. 
Work site is rehabilitated, cleaned up and made safe in accordance with established procedures. 
Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage or disposed of in accordance with established procedures. 
Relevant work permit(s), works completion records, reports, drawings and/or documentation and information are actually completed and appropriate personnel notified. 
Works completion records, reports, as installed /modified drawing and/or documentation and information are finalised and processed and appropriate personnel notified 

Forms

Assessment Cover Sheet

UETTDRCJ21A - Lay ESI electrical cables
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

UETTDRCJ21A - Lay ESI electrical cables

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: