Elements and Performance Criteria
- Carry out engine/equipment checks
- Timed and regular engine equipment checks are carried out on specialised machinery and equipment as specified in operator manuals.
- All relevant grease or lubricant points are lubricated according to manufacturer specifications.
- Oils and filters are changed at intervals prescribed in operator manuals.
- Hydraulic hoses and systems checked for deterioration and defects actioned in line with supervisor's instructions.
- Occupational Health and Safety (OHS) hazards are identified, risks assessed and risk controls are implemented.
- Carry out transmission checks
- Drive and steering clutches are checked for operation and adjustment in line with operator manual.
- Transmission oil levels are checked in line with operator manual.
- Tracks/wheels and undercarriage are checked for oil leaks and wear.
- Faulty seals or leaks are identified and corrective actions taken according to operator's instructions.
- Machine is regularly cleaned as an integral part of maintenance checks.
- Maintain components and attachments
- Personal protective equipment (PPE) is selected, used and maintained according to procedures.
- Machine operational replacement wear components are checked for wear and condition.
- Worn or unserviceable replacement components are replaced as part of daily routines.
- Component inspection and replacement activities are completed safely following enterprise and industry guidelines.
- Moving operational components are checked for wear and condition and adjusted to the tolerances specified in operator manuals where applicable.
- Work areas are cleaned, returned to operating condition and maintained according to enterprise and OHS requirements.
- Record maintenance