Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Determine model/prototype requirements
   • Applicable organisationrequirements relevant to the development of conceptual models and prototypes are verified and complied with throughout the work activity
   • Instructions and plans are read and interpreted to identify processes and materials to complete work tasks
   • Requirements of the client for the development of, or modifications to a conceptual model/prototype are assessed/rechecked in consultation with relevant stakeholders
   • Approval is sought for the proposed development of, or modifications to a conceptual model/prototype
2. Plan model/prototype-making activities
   • Steps involved in the development/modification of the model/prototype are identified in consultation with designated personnel
   • Inventory of required equipment, parts and components is established, including an assessment of their availability or the need to either manufacture or purchase them
   • Fabrication/machining processes and instructions are determined and clarified with participating departments/sections/areas
   • Timetable, resource requirements, personnel and purchase/supply schedule for the development or modifications to the model are confirmed in consultation with relevant personnel
   • The approved plan is communicated to all relevant personnel
3. Prepare tools and equipment
   • Required tools and equipment to construct or modify the model are selected
   • Necessary materials and components are obtained in accordance with design requirements
   • Tools and equipment are prepared for use
4. Produce conceptual model/prototype
   • Concept is drafted and dimensions established including any required process allowances
   • Model/prototype is constructed to design requirements
   • Model/prototype is fabricated to meet design requirements
   • Model/prototype is discussed with designated design engineering and/or other personnel and suitably modified as required
   • Surfaces are prepared and painted as required
5. Test and modify model/prototype
   • Model/prototype is checked against project objectives and/or specifications and/or company standards
   • Model/prototype is tested and checked in accordance with specifications
   • Test results are analysed and appropriate action taken to modify the model/prototype, if necessary
6. Document design and testing details
   • Outcomes of development process and associated testing are documented
   • Model/prototype and associated documentation are referred to relevant stakeholders

Required Skills

This section describes the essential skills and knowledge and their level required for this unit

Required skills

speak clearly and directly in order to develop project plans in consultation with relevant stakeholders apply teamwork to a range of situations including the construction of modelsprototypes solve problems particularly in teams in order to meet performance indicators show initiative in adapting to changing work conditions or contexts particularly when working across a variety of work areas access interpret and apply information on relevant organisation policies procedures and instructions particularly to ensure modelsprototypes are checked and tested in accordance with specifications and company standards manage time when planning preparing and organising work priorities take responsibility for organising own work priorities

Required knowledge

relevant Occupational Health and Safety and Environmental legislation regulations standards and codes of practice and organisation policies and procedures needed to carry out work in a manner which ensures the safety of people equipment and the environment methods for determining modelprototype requirements and producing models operation of systems and components operation and selection of computer hardware and software applicationssystems evaluation techniques types of tools and equipment and procedures for their safe use operation and maintenance established communication channels and protocols interpreting and applying quality standards procedures for the recording reporting and maintenance of workplace records and information

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria Required Skills and Knowledge the Range Statement and the Assessment Guidelines for this Training Package
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit	Evidence of the following is essential compliance with relevant legislation regulations standards codes of practice and established safe practices and organisation policies and procedures for developing conceptual models and prototypes working and communicating effectively and positively with others involved in the work applying within authority the requirements of the job or work role in relation to developing conceptual models that satisfy customer requirements achieving work quality goals accurate documentation of the prototype development process completing work area housekeeping requirements including the documentation of project activity and process outcomes
Context of and specific resources for assessment	assessment of the competency should take place in a safe working environment in a passenger motor vehicle manufacturing plant or simulated environment using toolsequipmentmachinery required for the production process without undue disruption to the production process assessment is to occur under standard and authorised work practices safety requirements and environmental constraints
Method of assessment	A range of assessment methods should be used to assess practical skills and knowledge The following examples are appropriate for this unit assessment methods must confirm consistency and accuracy of performance over time and in a range of organisation relevant contexts together with application of underpinning knowledge assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application assessment may be applied under project related conditions real or simulated and require evidence of process assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance but is able to be transferred to other circumstances

---

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.
Organisation requirements may include:	access and equity principles and practices environmental management (waste disposal, recycling and re-use guidelines) emergency and evacuation procedures equipment use procedures ethical standards legal obligations maintenance and storage procedures OHS requirements organisational and site guidelines policies and procedures relating to own role and responsibility procedural manuals quality assurance guidelines quality and continuous improvement processes and standards recording and reporting guidelines.
Developing conceptual models and prototypes may include:	developing and trialling conceptual models and prototypes, in consultation with professional and other relevant personnel, to aid the design, development and production of motor vehicles.
Instructions may include:	workplace procedures relating to the use and operation of tools and equipment departmental requirements workplace instructions, including job sheets, plans, specifications, drawings and designs workplace procedures relating to reporting and communications manufacturers' instructions for the use of equipment and materials.
Model/prototype may include:	models/prototypes formed using metal, plastics, clay, fibre glass, wood, foam, or other suitable material. Shaping may then be achieved through the development and use of moulds, templates, carving and computerised shaping equipment on these materials. The emphasis here is to produce a model/prototype that is suitable for the purpose for which it is being designed, not on its detailed construction.

---