Elements and Performance Criteria
- Plan and prepare
- Activities are carried out according to OHS and organisation requirements
- Work instructions, including relevant inspection reports and forms and quality requirements are obtained, confirmed with appropriate personnel and applied
- Tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability and any faults are rectified or reported prior to commencement
- Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use
- Select and check
- Machining tool is correctly selected in accordance with the maintenance schedule and machine specifications
- Machining tool is inspected and tested for compliance with specification
- Out of specification tools are processed for repair or disposal in accordance with organisation procedures
- Machining tool is cleaned, prepared for use and protected during transit
- Remove and replace
- Required location for the machining tools are checked and confirmed against machine specification
- Machine is made safe prior to commencing work in accordance with OHS requirements
- Housings/guards are removed in accordance with machine specifications
- Machining tools are located and removed
- Replacement machining tools are installed and set to machine specification
- Housings/guards are replaced and restored in accordance with machine specifications
- Test runs are conducted and sample products are checked to certify the new machining tool
- Documentation is completed outlining the detail of the replacement in accordance with organisation requirements
- Maintain machining tool stocks
- Machining tools are processed for maintenance in accordance with organisation procedures
- Stock levels of machining tools are reviewed and action taken to avoid stock out situations
- Stock levels of peripherals and consumables are maintained to support continuity of operations
- Work area is cleared and materials disposed of, reused or recycled in accordance with organisation requirements and cost reduction initiatives
- Tools and equipment are cleaned, checked, maintained and stored in accordance with organisation requirements