Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to produce drawing
   • Drawing purpose and design concept are defined and clarified according to workplace procedures
   • Drawing specifications are identified and confirmed with appropriate persons
   • Operational characteristics of object to be drawn are identified
   • Required drawing resources are selected
2. Draft initial drawing
   • Initial drawing is drafted from prototype model sketch and specifications
   • Production notes or special requirements are documented
   • Draft drawing is checked for accuracy against specifications and concept prototype drawing, and required approval is sought
3. Complete final drawing
   • Final drawing is compared to original design concepts and modified as required within scope of own authority
   • Drawing is checked and approved according to workplace procedures
4. Prepare to produce drawing
   • Drawing purpose and design concept are defined and clarified according to workplace procedures
   • Drawing specifications are identified and confirmed with appropriate persons
   • Operational characteristics of object to be drawn are identified
   • Required drawing resources are selected
5. Draft initial drawing
   • Initial drawing is drafted from prototype model sketch and specifications
   • Production notes or special requirements are documented
   • Draft drawing is checked for accuracy against specifications and concept prototype drawing, and required approval is sought
6. Complete final drawing
   • Final drawing is compared to original design concepts and modified as required within scope of own authority
   • Drawing is checked and approved according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Drawing specificationsmust include:	dimensions, angles, shapes and component finish fabrication processes measurements and specifications quality and technical information.
Resources must include:	design concept brief and associated specifications drawing equipment object or sub-assembly to be fabricated and drawn.
Drafting initial drawing must include:	appropriate object dimensions connection of dimensional points to match drawing.

---

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in the unit’s elements and performance criteria, range of conditions and foundation skills:

produce three detailed technical drawings of objects, automotive products or components from design concepts specific to a vehicle or equipment application

produce above drawings in both two- and three-dimensional form, and include dimensional points, fabrication notes and product finish requirements

draw above drawings manually or using electronic drawing aids with appropriate software.

---

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

common automotive terminology

techniques for translating design concepts into sketches and detailed technical drawings

technical drawing procedures and specifications

procedures for making and listing drawing measurements and notes

procedures for checking, documenting and storing drawings.

---