Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to adjust bicycle
   • Job requirements are determined from workplace instructions and bicycle to be adjusted is identified
   • Hazards associated with the work are identified and reported to workplace supervisor
   • Bicycle is inspected to determine component adjustment requirements according to manufacturer specifications and workplace procedures
   • Inspection findings, including adjustment recommendations, are reported according to workplace procedures and authorisation to proceed is obtained
2. Carry out adjustments to bicycle components
   • Tools and equipment required for adjusting bicycle are identified and checked for serviceability and adjustment method is confirmed
   • Adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and without causing damage to components or systems
   • Post-adjustment testing is carried out to ensure safe and correct operation of the bicycle according to workplace procedures
3. Complete work processes
   • Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
   • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
   • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
   • Workplace documentation is processed according to workplace procedures
4. Prepare to adjust bicycle
   • Job requirements are determined from workplace instructions and bicycle to be adjusted is identified
   • Hazards associated with the work are identified and reported to workplace supervisor
   • Bicycle is inspected to determine component adjustment requirements according to manufacturer specifications and workplace procedures
   • Inspection findings, including adjustment recommendations, are reported according to workplace procedures and authorisation to proceed is obtained
5. Carry out adjustments to bicycle components
   • Tools and equipment required for adjusting bicycle are identified and checked for serviceability and adjustment method is confirmed
   • Adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and without causing damage to components or systems
   • Post-adjustment testing is carried out to ensure safe and correct operation of the bicycle according to workplace procedures
6. Complete work processes
   • Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
   • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
   • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
   • Workplace documentation is processed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for manually handling bicycles environmental requirements, including procedures for trapping, storing and disposing of waste grease and oils.

---

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

adjust the following components on three different bicycles:

brakes

suspension

chain tension

seat

handlebars and steering

gears.

---

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to adjusting bicycles, including procedures for manually handling bicycles

environmental requirements, including procedures for trapping, storing and disposing of waste grease and oils

key bicycle terminology

techniques and procedures for adjusting bicycles, including:

bicycle measuring techniques

bicycle and adjustment procedures for components specified in the performance evidence

bicycle post-adjustment inspection and testing procedures

types and use of specialist tools and equipment to adjust bicycles

assembly procedures for bicycles and components.

---