Elements and Performance Criteria
- Prepare to service bicycle wheels and hubs
- Job requirements, including wheel and hub service needs, are determined from workplace instructions
- Bicycle manufacturer specifications and service instructions for wheels and hubs are researched and interpreted
- Condition of bicycle wheels and hubs is inspected for faults and worn or damaged components using visual inspection methods and by comparing measurements against manufacturer specifications
- Hazards associated with the work are identified and risks are managed
- Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
- Work area is prepared and work is planned to avoid damage to bicycle, minimise waste and use time efficiently
- Carry out service of wheels and hubs
- Bicycle wheels are removed according to workplace procedures and manufacturer specifications
- Wheels and hubs are serviced according to work plan, manufacturer specifications, and safety and environmental requirements
- Serviced wheels and hubs are refitted to bicycle and tested and adjusted as required according to job requirements and workplace procedures
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
- Problems outside own area of responsibility are reported to appropriate person
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures
- Prepare to service bicycle wheels and hubs
- Job requirements, including wheel and hub service needs, are determined from workplace instructions
- Bicycle manufacturer specifications and service instructions for wheels and hubs are researched and interpreted
- Condition of bicycle wheels and hubs is inspected for faults and worn or damaged components using visual inspection methods and by comparing measurements against manufacturer specifications
- Hazards associated with the work are identified and risks are managed
- Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
- Work area is prepared and work is planned to avoid damage to bicycle, minimise waste and use time efficiently
- Carry out service of wheels and hubs
- Bicycle wheels are removed according to workplace procedures and manufacturer specifications
- Wheels and hubs are serviced according to work plan, manufacturer specifications, and safety and environmental requirements
- Serviced wheels and hubs are refitted to bicycle and tested and adjusted as required according to job requirements and workplace procedures
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
- Problems outside own area of responsibility are reported to appropriate person
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures