Elements and Performance Criteria
- Prepare to repair bicycle frame
- Job requirements are determined from workplace instructions
- Bicycle manufacturer specifications are accessed and interpreted
- Hazards associated with the work are identified and risks are managed
- Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
- Work area is prepared and work is planned to avoid damage to bicycle, minimise waste and use time efficiently
- Inspect bicycle frame
- Bicycle frame to be repaired is identified and checked against job requirements
- Bicycle frame is inspected for faults, wear or damage using visual inspection methods and by comparing measurements against manufacturer specifications
- Repair options for bicycle frame are identified and confirmed with customer
- Required parts and materials are identified and their availability checked
- Work area is prepared and repair sequence, including post-repair testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently
- Carry out repairs to bicycle frame
- Bicycle frame is repaired according to workplace instructions, manufacturer specifications, and safety and environmental requirements
- Required replacement parts are checked and fitted according to manufacturer specifications, and identified problems are reported to appropriate person
- Repaired frame is checked and tested against manufacturer specifications according to workplace procedures
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures
- Prepare to repair bicycle frame
- Job requirements are determined from workplace instructions
- Bicycle manufacturer specifications are accessed and interpreted
- Hazards associated with the work are identified and risks are managed
- Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
- Work area is prepared and work is planned to avoid damage to bicycle, minimise waste and use time efficiently
- Inspect bicycle frame
- Bicycle frame to be repaired is identified and checked against job requirements
- Bicycle frame is inspected for faults, wear or damage using visual inspection methods and by comparing measurements against manufacturer specifications
- Repair options for bicycle frame are identified and confirmed with customer
- Required parts and materials are identified and their availability checked
- Work area is prepared and repair sequence, including post-repair testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently
- Carry out repairs to bicycle frame
- Bicycle frame is repaired according to workplace instructions, manufacturer specifications, and safety and environmental requirements
- Required replacement parts are checked and fitted according to manufacturer specifications, and identified problems are reported to appropriate person
- Repaired frame is checked and tested against manufacturer specifications according to workplace procedures
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures