Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to inspect, service and repair electronic management, monitoring and tracking system
   • Job requirements are determined according to workplace instructions
   • Inspection, servicing and repair procedures are accessed and interpreted
   • Hazards associated with the work are identified and risks are managed
   • Tools and electrical test equipment are selected and checked for serviceability
2. Inspect and test system
   • System is inspected and tested according to workplace procedures and safety requirements
   • Circuits are tested according to workplace procedures and without causing damage to components or systems
   • Inspection results are compared with manufacturer specifications
   • Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
3. Service and repair system
   • System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
   • System is performance tested and final adjustments are made
   • Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present
4. Complete work processes
   • Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use with protective guards, safety features and cowlings in place
   • Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
   • Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
   • Workplace documentation is processed according to workplace procedures
5. Prepare to inspect, service and repair electronic management, monitoring and tracking system
   • Job requirements are determined according to workplace instructions
   • Inspection, servicing and repair procedures are accessed and interpreted
   • Hazards associated with the work are identified and risks are managed
   • Tools and electrical test equipment are selected and checked for serviceability
6. Inspect and test system
   • System is inspected and tested according to workplace procedures and safety requirements
   • Circuits are tested according to workplace procedures and without causing damage to components or systems
   • Inspection results are compared with manufacturer specifications
   • Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
7. Service and repair system
   • System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
   • System is performance tested and final adjustments are made
   • Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present
8. Complete work processes
   • Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use with protective guards, safety features and cowlings in place
   • Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
   • Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
   • Workplace documentation is processed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety requirements must include:	work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for: selecting and using personal protective equipment (PPE), including clothing, and eye and hand protection working safely with high current electrical systems.
Environmental requirements must include:	procedures: found in safety data sheets (SDS) relating to toxic and corrosive substances for recycling and disposing of replaced electronic management, monitoring and tracking system components.

---

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

inspect, service and repair three of the following electronic management, monitoring and tracking systems:

receivers

displays

electronic controllers

steering actuators

telematics

connectors and harnesses.

---

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting, servicing and repairing electronic management, monitoring and tracking systems, including procedures for:

using personal protective equipment (PPE), including clothing, and eye and hand protection

working safely with high current electrical systems

environmental requirements, including procedures:

found in safety data sheets (SDS) relating to toxic and corrosive substances

for recycling and disposing of replaced electronic management, monitoring and tracking system components

operating principles of electronic management, monitoring and tracking systems, including:

system overview

global positioning system (GPS)

electronic sensors and processors

electrical actuators

application, purpose and operation of electronic management, monitoring and tracking systems, including:

receivers

displays

electronic controllers

steering actuators

telematics

connectors and harnesses

techniques for reading and interpreting automotive technical information, graphic symbols and wiring diagrams

inspection procedures, including:

analysing system operation

identifying software versions

interrogating electronic fault codes

testing electrical systems, including procedures for accessing electrical terminals and using test probes without damaging connectors, fuse holders or wiring

service and repair procedures, including:

component removal and replacement procedures

downloading and installing relevant component software

component and associated system adjustment procedures to include variable operating conditions

post-repair testing procedures, including:

confirming that vehicle or machinery electronic monitoring, management and tracking systems are serviceable and operating to manufacturer specifications

confirming that no other problems are present as a result of the repair.

---