Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Identify and confirm the work requirement
   • Nature and objective of diagnostic requirements are determined from workplace instructions
   • Existence of fault in heavy commercial vehicle braking system is confirmed from direct or indirect evidence
   • Hazards associated with the work are identified and risks are managed according to workplace procedures and safety and environmentalrequirements
2. Prepare to perform diagnosis
   • Manufacturer specifications and other technical information for vehicle braking system are accessed and interpreted
   • Diagnostic procedures and options are identified
   • Diagnostic method sequence, tests and testing processes are identified and selected from the range of available options
   • Testing equipment is obtained and prepared according to manufacturer specifications and workplace procedures
   • Tools, equipment and materials required to support the diagnostic process are identified, selected and prepared for use
3. Apply diagnostic procedures
   • Selected diagnostic process is followed and testing is carried out according to manufacturer specifications, workplace procedures and safety and environmental requirements
   • Diagnostic findings are verified, as required, by using reliable alternative or optional process according to manufacturer specifications and workplace procedures
   • Conclusions are drawn from findings and documented according to workplace procedures, including recommendations for necessary repairs
   • Conclusions are provided to appropriate personnel or customer to confirm further action to be taken
4. Complete work processes
   • Vehicle is presented ready to be repaired or returned to the customer
   • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
   • Tools and equipment are checked and stored according to workplace procedures
5. Identify and confirm the work requirement
   • Nature and objective of diagnostic requirements are determined from workplace instructions
   • Existence of fault in heavy commercial vehicle braking system is confirmed from direct or indirect evidence
   • Hazards associated with the work are identified and risks are managed according to workplace procedures and safety and environmentalrequirements
6. Prepare to perform diagnosis
   • Manufacturer specifications and other technical information for vehicle braking system are accessed and interpreted
   • Diagnostic procedures and options are identified
   • Diagnostic method sequence, tests and testing processes are identified and selected from the range of available options
   • Testing equipment is obtained and prepared according to manufacturer specifications and workplace procedures
   • Tools, equipment and materials required to support the diagnostic process are identified, selected and prepared for use
7. Apply diagnostic procedures
   • Selected diagnostic process is followed and testing is carried out according to manufacturer specifications, workplace procedures and safety and environmental requirements
   • Diagnostic findings are verified, as required, by using reliable alternative or optional process according to manufacturer specifications and workplace procedures
   • Conclusions are drawn from findings and documented according to workplace procedures, including recommendations for necessary repairs
   • Conclusions are provided to appropriate personnel or customer to confirm further action to be taken
8. Complete work processes
   • Vehicle is presented ready to be repaired or returned to the customer
   • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
   • Tools and equipment are checked and stored according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for: working with stored energy, including pneumatic pressure and spring energy handling and controlling brake dust and brake fluids environmental requirements, including procedures for trapping, storing and disposing of hazardous materials and substances released from braking systems, including hydraulic fluid, brake fluid and brake fibres.

---

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

diagnose a complex fault in the following heavy commercial vehicle braking systems:

air braking system

air over hydraulic braking system

anti-lock braking system

the above diagnosis must involve two of the following types of complex faults:

an intermittent fault

a fault that affects more than one system

a fault introduced as a result of a system repair

an indirect fault caused by the influence of external systems.

---

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to diagnosing complex faults in heavy commercial vehicle braking systems, including procedures for:

working with stored energy, including pneumatic pressure and spring energy

handling and controlling brake dust and brake fluids

environmental requirements, including procedures for trapping, storing and disposing of hazardous materials and substances released from braking systems, including hydraulic fluid, brake fluid and brake fibres

types of complex faults relating to heavy commercial vehicle braking systems, including:

intermittent

multi-system

introduced as a result of system repair

indirect, caused by the influence of external systems

types, function and operation of heavy commercial vehicle braking systems, including:

air braking systems

hydraulic braking systems

air over hydraulic braking systems

anti-lock braking systems

testing procedures for heavy commercial vehicle braking systems, including:

vehicle dynamic and static testing procedures

abnormal noise analysis

component failure analysis

types, functions, operation and limitations of diagnostic testing equipment required to diagnose complex faults in heavy commercial vehicle braking systems

procedures for accessing and interpreting scan tool system data, including:

diagnostic trouble codes (DTCs), including:

conditions that set the DTCs

conditions for running DTCs

live data

freeze frame data

waveforms

vehicle continuous and non-continuous monitored systems

methods and processes for documenting and reporting diagnostic findings and recommendations.

---