Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to service and repair reciprocating cutting system
   • Job requirements are determined from workplace instructions
   • Service and repair procedures and information are sourced and interpreted
   • Hazards associated with the work are identified and risks are managed
   • Tools, equipment and materials are selected and checked according to workplace procedures
2. Determine service and repair requirements of reciprocating cutting system
   • System is inspected and tested according to workplace procedures, manufacturer specifications and safety requirements
   • Faults are identified from inspection and causes of faults are determined
   • Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment
   • Authorisation to proceed with service and repair is obtained according to workplace procedures
3. Carry out service and repair activities
   • Service and repair options are analysed and those most appropriate to the circumstances are selected
   • Tools, equipment and materials are selected and checked
   • Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety and environmental requirements
   • Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures
4. Check reciprocating cutting system for normal operation
   • System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements
   • Adjustments are made as required and reciprocating cutting system is re-tested
5. Complete work processes
   • Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
   • Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
   • Tools and equipment are checked and stored according to workplace procedures
   • Workplace documentation is processed according to workplace procedures
6. Prepare to service and repair reciprocating cutting system
   • Job requirements are determined from workplace instructions
   • Service and repair procedures and information are sourced and interpreted
   • Hazards associated with the work are identified and risks are managed
   • Tools, equipment and materials are selected and checked according to workplace procedures
7. Determine service and repair requirements of reciprocating cutting system
   • System is inspected and tested according to workplace procedures, manufacturer specifications and safety requirements
   • Faults are identified from inspection and causes of faults are determined
   • Inspection findings and test results are reported according to workplace procedures, and include recommendations for necessary service, repair or adjustment
   • Authorisation to proceed with service and repair is obtained according to workplace procedures
8. Carry out service and repair activities
   • Service and repair options are analysed and those most appropriate to the circumstances are selected
   • Tools, equipment and materials are selected and checked
   • Components are removed and inspected for serviceability according to manufacturer specifications, workplace procedures, and safety and environmental requirements
   • Reusable, repaired and replacement components are fitted and adjusted according to manufacturer specifications and workplace procedures
9. Check reciprocating cutting system for normal operation
   • System is operated and compared to manufacturer specifications according to workplace procedures and safety requirements
   • Adjustments are made as required and reciprocating cutting system is re-tested
10. Complete work processes
    • Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
    • Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
    • Tools and equipment are checked and stored according to workplace procedures
    • Workplace documentation is processed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Service and repair procedures must include:	inspecting, repairing and replacing components adjusting cutting system applying blade lubricants testing repaired unit, including overload protection systems sharpening blades and angles.
Safety requirements must include:	work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for: selecting and using personal protective equipment (PPE) starting and checking operation, adjustment and alignment of reciprocating cutting system operating overload system working with 240 volt equipment.

---

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

service and repair three different reciprocating cutting systems, including the following:

double and single sided powered hedge trimmers

mechanical tree loppers.

---

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health requirements relating to servicing and repairing reciprocating cutting systems, including:

selecting and using personal protective equipment (PPE)

starting and checking operation, adjustment and alignment of reciprocating cutting system

operating overload system

working with 240 volt equipment

application, purpose and operation of reciprocating cutting systems, including:

double and single sided powered hedge trimmers

mechanical tree loppers

power shears

types of lubricants, and their application and methods of lubrication

service and repair procedures for reciprocating cutting systems, including:

drive system gearbox

overload devices

protective guards and cowlings

handle assembly

anti-vibration system

cleaning, sharpening and adjusting blades

procedures for using sharpening equipment for reciprocating cutting tools

post-repair testing procedures for reciprocating cutting systems, including operating system through full operating range.

---