1. Prepare to remove and replace a steering assembly
   • Safety and environmental requirements are sourced and interpreted
   • Task instruction is interpreted and vehicle steering assembly to be worked on is identified
   • Manufacturer specifications and workplace procedures for removing and replacing steering assembly are sourced and interpreted
   • Potential hazards and risks associated with task are identified and reported to workplace supervisor
   • Tools and equipment required for removing and replacing steering assembly are identified according to manufacturer specifications
2. Remove and inspect steering assembly
   • Tools, equipment and materials are selected and checked prior to use according to manufacturer specifications and safety requirements
   • Vehicle is prepared for steering assembly removal according toworkplace procedures and safety and environmental requirements
   • Vehicle steering assembly is removed according to workplace procedures and manufacturer specifications and safety and environmental requirements, and without causing damage to components, tools or equipment
   • Steering assembly components are arranged, identified and inspected according to manufacturer specifications
   • Results of inspecting steering system components are recorded
3. Replace steering assembly
   • Steering assembly components are prepared for assembly
   • Steering assemblies are replaced according to workplace procedures, manufacturer specifications and safety and environmental requirements, and without causing damage to components, tools or equipment
   • Front wheel toe-in is measured and adjusted according to manufacturer specifications
4. Complete work processes
   • Final inspection is made to ensure work meets task instruction and workplace standards, and vehicle steering assembly is presented ready for use or storage according to workplace procedures
   • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored according to environmental requirements and workplace procedures
   • Tools and equipment are checked and stored according to workplace procedures, or tagged and reported where necessary
   • Workplace documentation is processed according to workplace procedures

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.