Elements and Performance Criteria
- Prepare for work
- Work instructions are used to determine job requirements, including method, material and equipment.
- Job specifications are read and interpreted.
- Occupational health and safety (OHS) requirements, including dust and fume collection, breathing apparatus and eye and ear personal protection needs, are observed throughout the work.
- Material for work is selected.
- Equipment and tooling are identified and checked for safe and effective operation.
- Procedures are determined to minimise waste material.
- Procedures are identified for maximising energy efficiency while completing job.
- Remove bolt-on body panels, panel sections and ancillary fittings
- Information is accessed and interpreted from manufacturer/ \component supplier specifications.
- Removal of body panels, panel sections and ancillary fittings is completed without causing damage to component or system.
- Where there is a potential disturbance to electrical, mechanical, electronic or other systems, assistance is sought, if required.
- Removal activities are carried out according to industry regulations/guidelines, OHS requirements, legislation and enterprise procedures/policies.
- Removed parts are tagged and stored to workplace requirements.
- Replace and realign bolt-on body panels, panel sections and ancillary fittings
- Information is accessed and interpreted from manufacturer/component supplier specifications.
- Replacement components and ancillary fittings meet specifications for dimensions, material and functional capability.
- Components and ancillary fittings are replaced and realigned using approved methods, material and equipment.
- Sealant is selected and applied according to product manufacturer/component supplier specification for type, method of application and thickness.
- Where there has been a disturbance to electrical, mechanical, electronic or other systems, assistance is sought, if required.
- Replacement and realignment of vehicle body panels, panel sections and ancillary fittings are completed without causing damage to component or system.
- Replacement and realignment activities are carried out according to industry regulations/guidelines, OHS requirements, legislation and enterprise procedures/policies.
- Clean up work area and maintain equipment
- Material that can be reused is collected and stored.
- Waste and scrap is removed following workplace and environmental procedure.
- Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures.
- Unserviceable equipment is tagged and faults identified in accordance with workplace requirements.
- Operator maintenance is completed in accordance with manufacturer/component supplier specifications and worksite procedures.
- Tooling is maintained in accordance with workplace procedures.