Elements and Performance Criteria
- Prepare to cut and process flat laminated glass
- Job requirements are determined from workplace instructions
- Information is accessed and interpreted from laminated glass supplier specifications
- Laminated glass is sourced according to work order and job specifications and checked for quality
- Hazards associated with the work are identified and risks are managed
- Glass cutting equipment and personal protective equipment (PPE) are selected and checked for serviceability
- Work is planned to minimise off-cuts and use time efficiently
- Fabricate templates and patterns
- Accurate measurements are taken or checked to prepare templates and patterns
- Suitable materials and equipment are used to fabricate templates and patterns
- Template and pattern are marked out and fabricated according to workplace instructions, workplace procedures, and safety and environmental requirements
- Process glass
- Glass is measured, marked and cut out according to measurements, template and pattern, and safety and environmental requirements
- Glass cutting is completed according to workplace procedures, and safety and environmental requirements, and without causing damage to glass being cut
- Glass edges are arris or bevel edged according to workplace procedures, and safety and environmental requirements, and without causing damage to glass
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures
- Prepare to cut and process flat laminated glass
- Job requirements are determined from workplace instructions
- Information is accessed and interpreted from laminated glass supplier specifications
- Laminated glass is sourced according to work order and job specifications and checked for quality
- Hazards associated with the work are identified and risks are managed
- Glass cutting equipment and personal protective equipment (PPE) are selected and checked for serviceability
- Work is planned to minimise off-cuts and use time efficiently
- Fabricate templates and patterns
- Accurate measurements are taken or checked to prepare templates and patterns
- Suitable materials and equipment are used to fabricate templates and patterns
- Template and pattern are marked out and fabricated according to workplace instructions, workplace procedures, and safety and environmental requirements
- Process glass
- Glass is measured, marked and cut out according to measurements, template and pattern, and safety and environmental requirements
- Glass cutting is completed according to workplace procedures, and safety and environmental requirements, and without causing damage to glass being cut
- Glass edges are arris or bevel edged according to workplace procedures, and safety and environmental requirements, and without causing damage to glass
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures