Elements and Performance Criteria
- Prepare to remove and install fixed body glass
- Job requirements are determined from workplace instructions
- Removal and installation information is accessed and interpreted from fixed body glass supplier specifications
- Work is planned to minimise waste and use time efficiently
- Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly
- Materials and fixed body glass are selected according to vehicle manufacturer specifications and job requirements, and are inspected for quality
- Adhesives and sealants are selected and relevant safety data sheets (SDS) are sourced and interpreted accurately
- Hazards associated with the work are identified and risks are managed
- Tools and equipment are selected and checked for serviceability
- Vehicle is protected and safely located according to workplace procedures
- Carry out removal and installation activities
- Fixed body glass component is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components
- Fixed body glass component is installed, bonded or sealed, and finished according to manufacturer specifications, and safety and environmental requirements
- Adhesive is cured according to adhesive manufacturer specifications and timelines, as required
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, and vehicle is presented ready for use
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures
- Prepare to remove and install fixed body glass
- Job requirements are determined from workplace instructions
- Removal and installation information is accessed and interpreted from fixed body glass supplier specifications
- Work is planned to minimise waste and use time efficiently
- Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly
- Materials and fixed body glass are selected according to vehicle manufacturer specifications and job requirements, and are inspected for quality
- Adhesives and sealants are selected and relevant safety data sheets (SDS) are sourced and interpreted accurately
- Hazards associated with the work are identified and risks are managed
- Tools and equipment are selected and checked for serviceability
- Vehicle is protected and safely located according to workplace procedures
- Carry out removal and installation activities
- Fixed body glass component is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components
- Fixed body glass component is installed, bonded or sealed, and finished according to manufacturer specifications, and safety and environmental requirements
- Adhesive is cured according to adhesive manufacturer specifications and timelines, as required
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, and vehicle is presented ready for use
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures