Elements and Performance Criteria
- Prepare to install side window
- Job requirements are determined from workplace instructions
- Information is accessed and interpreted from manufacturer specifications, workplace procedures, and sealant safety data sheets (SDS)
- Work is planned to minimise waste and use time efficiently
- Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly
- Materials required to install side window are selected and checked for quality
- Hazards associated with the work are identified and risks are managed
- Tools and equipment for making opening and installing side window are selected and checked for serviceability
- Vehicle is protected and safely located according to workplace procedures
- Fabricate templates
- Mark out and cut panel for side window
- Template is used to mark out areas on vehicle to be cut
- Window opening is cut in panel using approved methods and equipment according to workplace procedures and safety and environmental requirements
- Panel edges and trim are prepared for installation of side window
- Panels and trim are reinforced as required to comply with vehicle manufacturer specifications and without causing damage to vehicle or components
- Install side window
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, customer is informed of time to wait before driving vehicle, and vehicle is presented ready for use
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures
- Prepare to install side window
- Job requirements are determined from workplace instructions
- Information is accessed and interpreted from manufacturer specifications, workplace procedures, and sealant safety data sheets (SDS)
- Work is planned to minimise waste and use time efficiently
- Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly
- Materials required to install side window are selected and checked for quality
- Hazards associated with the work are identified and risks are managed
- Tools and equipment for making opening and installing side window are selected and checked for serviceability
- Vehicle is protected and safely located according to workplace procedures
- Fabricate templates
- Mark out and cut panel for side window
- Template is used to mark out areas on vehicle to be cut
- Window opening is cut in panel using approved methods and equipment according to workplace procedures and safety and environmental requirements
- Panel edges and trim are prepared for installation of side window
- Panels and trim are reinforced as required to comply with vehicle manufacturer specifications and without causing damage to vehicle or components
- Install side window
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, customer is informed of time to wait before driving vehicle, and vehicle is presented ready for use
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures