Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to install vehicle sunroof
   • Job requirements are determined from workplace instructions
   • Sunroof installation information is sourced and interpreted from manufacturer and original equipment manufacturer (OEM) specifications and workplace procedures
   • Sunroof and materials are sourced and inspected for quality
   • Hazards associated with the work are identified and risks are managed
   • Tools and equipment are sourced and checked for serviceability
   • Work is planned to identify suitable installation methods, minimise waste, and prevent damage to vehicle
2. Fabricate template for sunroof
   • Suitable template materials are selected
   • Template is fabricated according to sunroof specifications and workplace procedures
3. Mark out and cut roof panels, and prepare cut edges
   • Accurate measurements are taken and template is used to mark out roof area to be cut
   • Roof panels are cut and trimmed using approved methods and equipment, including vehicle protection equipment, and according to manufacturer specifications, workplace procedures, and safety and environmental requirements
   • Cut edges are filed and prepared for sunroof installation
   • Cut roof panel is reinforced according to OEM or approved agency’s structural requirements
   • Marking out and cutting are completed without causing damage to vehicle or components
4. Install sunroof
   • Sunroof is lifted into place without causing damage to vehicle or components
   • Sunroof fit is installed and checked prior to sealing
   • Sunroof is sealed according to manufacturer specifications
   • Installed sunroof is checked for safe operation and is leak tested
5. Complete work processes
   • Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
   • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
   • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
   • Workplace documentation is processed according to workplace procedures
6. Prepare to install vehicle sunroof
   • Job requirements are determined from workplace instructions
   • Sunroof installation information is sourced and interpreted from manufacturer and original equipment manufacturer (OEM) specifications and workplace procedures
   • Sunroof and materials are sourced and inspected for quality
   • Hazards associated with the work are identified and risks are managed
   • Tools and equipment are sourced and checked for serviceability
   • Work is planned to identify suitable installation methods, minimise waste, and prevent damage to vehicle
7. Fabricate template for sunroof
   • Suitable template materials are selected
   • Template is fabricated according to sunroof specifications and workplace procedures
8. Mark out and cut roof panels, and prepare cut edges
   • Accurate measurements are taken and template is used to mark out roof area to be cut
   • Roof panels are cut and trimmed using approved methods and equipment, including vehicle protection equipment, and according to manufacturer specifications, workplace procedures, and safety and environmental requirements
   • Cut edges are filed and prepared for sunroof installation
   • Cut roof panel is reinforced according to OEM or approved agency’s structural requirements
   • Marking out and cutting are completed without causing damage to vehicle or components
9. Install sunroof
   • Sunroof is lifted into place without causing damage to vehicle or components
   • Sunroof fit is installed and checked prior to sealing
   • Sunroof is sealed according to manufacturer specifications
   • Installed sunroof is checked for safe operation and is leak tested
10. Complete work processes
    • Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
    • Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
    • Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
    • Workplace documentation is processed according to workplace procedures

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Materials must include:	sunroof templates adhesives and sealants fasteners cleaning materials.
Tools and equipment must include:	personal protective equipment (PPE) measuring equipment marking out equipment metal or panel cutting equipment vehicle protection equipment.
Safety and environmental requirements must include:	work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for: selecting and using PPE manually handling sunroofs using tools and equipment environmental requirements, including procedures for trapping, storing and disposing of waste materials.

---

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance, range of conditions and foundation skills:

install a sunroof to a vehicle.

---

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to installing vehicle sunroofs, including procedures for:

selecting and using personal protecting equipment (PPE)

manually handling sunroofs

using tools and equipment

environmental requirements, including procedures for trapping, storing and disposing of waste materials

sunroof installation methods and techniques, including:

tools, equipment and materials to install vehicle sunroof

identifying sunroof specifications and fitting location

measuring and marking procedures prior to cutting vehicle roof and installing the sunroof

template fabrication techniques

panel and trim cutting procedures

panel reinforcing methods

procedures for protecting vehicle and components when installing sunroofs

procedures for final inspection and testing of fitted vehicle sunroof.

---