Elements and Performance Criteria
- Prepare to repair body panels using filler
- Job requirements are determined from workplace instructions
- Manufacturer specifications for body filler application and relevant safety data sheets (SDS) are sourced and interpreted
- Materials, including filler, needed for body panel repair are selected and checked for quality
- Hazards associated with the work are identified and risks are managed
- Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
- Work area is prepared and work is planned to minimise waste and use time efficiently
- Carry out repair activities using filler
- Paint is removed and damaged panel prepared for filler repair
- Damaged panel sections are rectified using panel beating techniques to workplace pre-filler application standard
- Body filler is mixed according to manufacturer specifications
- Filler is applied to repair panels using approved body filler instructions and equipment according to workplace procedures, body filler manufacturer specifications, and safety and environmental requirements
- Repairs are completed to pre-paint condition
- Complete work processes
- Final inspection is made to ensure work meets workplace repair standards and panel is presented ready for painting
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures
- Prepare to repair body panels using filler
- Job requirements are determined from workplace instructions
- Manufacturer specifications for body filler application and relevant safety data sheets (SDS) are sourced and interpreted
- Materials, including filler, needed for body panel repair are selected and checked for quality
- Hazards associated with the work are identified and risks are managed
- Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
- Work area is prepared and work is planned to minimise waste and use time efficiently
- Carry out repair activities using filler
- Paint is removed and damaged panel prepared for filler repair
- Damaged panel sections are rectified using panel beating techniques to workplace pre-filler application standard
- Body filler is mixed according to manufacturer specifications
- Filler is applied to repair panels using approved body filler instructions and equipment according to workplace procedures, body filler manufacturer specifications, and safety and environmental requirements
- Repairs are completed to pre-paint condition
- Complete work processes
- Final inspection is made to ensure work meets workplace repair standards and panel is presented ready for painting
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures