Elements and Performance Criteria
- Prepare to repair corroded panel sections
- Job requirements are determined from workplace instructions
- Repair material is selected and checked for quality
- Hazards associated with the work are identified and risks are managed
- Tools and equipment are selected and checked for serviceability
- Work is planned to identify repair methods, minimise waste, and use time efficiently
- Remove corroded sections
- Corroded vehicle body panel and components are identified
- Body section is assessed to determine appropriate repair method
- Corroded panel is removed according to workplace procedures and safety and environmental requirements, and without causing damage to vehicle or components
- Assistance is sought from authorised personnel where removal of components disturbs vehicle trim or electrical, mechanical or air conditioning systems
- Reform and replace corroded sections
- Repair material is selected according to vehicle manufacturer specifications
- Corroded panel section is measured and formed use forming equipment
- Panel section is repaired or reformed using approved methods and equipment
- Repaired corroded section is replaced, welded and finished
- Replaced section is checked for compliance against vehicle manufacturer specifications
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations and panel is presented ready for painting
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures
- Prepare to repair corroded panel sections
- Job requirements are determined from workplace instructions
- Repair material is selected and checked for quality
- Hazards associated with the work are identified and risks are managed
- Tools and equipment are selected and checked for serviceability
- Work is planned to identify repair methods, minimise waste, and use time efficiently
- Remove corroded sections
- Corroded vehicle body panel and components are identified
- Body section is assessed to determine appropriate repair method
- Corroded panel is removed according to workplace procedures and safety and environmental requirements, and without causing damage to vehicle or components
- Assistance is sought from authorised personnel where removal of components disturbs vehicle trim or electrical, mechanical or air conditioning systems
- Reform and replace corroded sections
- Repair material is selected according to vehicle manufacturer specifications
- Corroded panel section is measured and formed use forming equipment
- Panel section is repaired or reformed using approved methods and equipment
- Repaired corroded section is replaced, welded and finished
- Replaced section is checked for compliance against vehicle manufacturer specifications
- Complete work processes
- Final inspection is made to ensure work meets workplace expectations and panel is presented ready for painting
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures