Elements and Performance Criteria
- Prepare to fabricate vehicle composite material component
- Job requirements are determined from workplace instructions
- Composite information is accessed and interpreted
- Hazards associated with the work are identified and risks are managed
- Composite materials and equipment and personal protective equipment (PPE) are selected and checked for serviceability
- Component surface area is measured and calculated to determine required quantities of gel coat, resins, catalyst and matting
- Work area with approved ventilation is checked for correct operation and faults are reported to authorised personnel
- Work is planned to identify methods to fabricate component, minimise waste, and use time efficiently
- Fabricate component
- Equipment and materials are set up and prepared for use
- Composite materials are mixed and applied according to manufacturer and equipment specifications to fabricate component
- Component is fabricated using composite materials according to workplace procedures and safety and environmental requirements, and without causing damage to vehicle and equipment
- Fabricated component is checked against job specifications and workplace quality requirements
- Complete work processes
- Final inspection is made to ensure work meets workplace and customer specifications, and components are presented ready for use
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures
- Prepare to fabricate vehicle composite material component
- Job requirements are determined from workplace instructions
- Composite information is accessed and interpreted
- Hazards associated with the work are identified and risks are managed
- Composite materials and equipment and personal protective equipment (PPE) are selected and checked for serviceability
- Component surface area is measured and calculated to determine required quantities of gel coat, resins, catalyst and matting
- Work area with approved ventilation is checked for correct operation and faults are reported to authorised personnel
- Work is planned to identify methods to fabricate component, minimise waste, and use time efficiently
- Fabricate component
- Equipment and materials are set up and prepared for use
- Composite materials are mixed and applied according to manufacturer and equipment specifications to fabricate component
- Component is fabricated using composite materials according to workplace procedures and safety and environmental requirements, and without causing damage to vehicle and equipment
- Fabricated component is checked against job specifications and workplace quality requirements
- Complete work processes
- Final inspection is made to ensure work meets workplace and customer specifications, and components are presented ready for use
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- Workplace documentation is processed according to workplace procedures