Elements and Performance Criteria
- Prepare for work
- Work instructions are used to determine job requirements, including method, process and equipment.
- Job specifications are read and interpreted.
- Workplace health and safety (WHS) requirements, including personal safety needs, are observed throughout the work.
- Equipment and tooling are identified and checked for safe and effective operation.
- Procedures are determined to minimise task time.
- Match material
- Information is accessed and interpreted from manufacturer/ component supplier specifications.
- Matching procedures are carried out in accordance with manufacturer/component supplier specifications.
- Matching procedures are completed within established industry enterprise guidelines.
- Activities are carried out according to industry regulations/ guidelines, WHS requirements, legislation and enterprise procedures/policies.
- Measure and cut material
- Information is accessed and interpreted from manufacturer/ component supplier specifications.
- Measuring and cutting procedures are carried out in accordance with manufacturer/component supplier specifications.
- Measuring and cutting procedures are completed within established industry enterprise guidelines.
- Activities are carried out according to industry regulations/ guidelines, WHS requirements, legislation and enterprise procedures/policies.
- Fabricate trim/covers to suit vehicle/ components
- Information is accessed and interpreted from manufacturer/ component supplier specifications.
- Trim/cover fabrication procedures are carried out in accordance with manufacturer/component supplier specifications.
- Fabrication procedures are completed within established industry enterprise guidelines.
- Activities are carried out according to industry regulations/guidelines, WHS requirements, legislation and enterprise procedures/policies.
- Attach material cover to vehicle/component
- Information is accessed and interpreted from manufacturer/ component supplier specifications.
- Attaching procedures are carried out in accordance with manufacturer/component supplier specifications.
- Attaching procedures are completed within established industry/enterprise guidelines.
- Activities are carried out according to industry regulations/ guidelines, WHS requirements, legislation and enterprise procedures/policies.
- Clean up work area and maintain equipment
- Material that can be reused is collected and stored.
- Waste and scrap is removed following workplace procedure.
- Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures.
- Unserviceable equipment is tagged and faults identified in accordance with workplace requirements.
- Operator maintenance is completed in accordance with manufacturer/component supplier specifications and worksite procedures.
- Tooling and equipment is maintained in accordance with workplace procedures.