REQUIRED KNOWLEDGE AND SKILLS

This describes the essential knowledge and skills and their level required for this unit

Required knowledge

Relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders

In Defence context relevant Defence Orders and Instructions

Relevant OHampS and environmental procedures and regulations

Principles of aerodynamics

Circuit and landing procedures

All required checklist items

The causes of loss of directional control during landing

The aerodynamic forces involved during the flare

The effect of wind on landing performance

The cross wind limits for the aeroplane type flown

The techniques used to land an aeroplane in a cross wind

How to calculate a cross wind component

The causes of aquaplaning and procedures to avoid aquaplaning

Aeroplane performance calculation

Air traffic procedures

Windsock and other indicators that are used to determine wind velocity

Wake turbulence considerations

Steps for landing an aeroplane in normal headwind and crosswind

TouchampGo procedures

Required skills

Exercise sound judgement sufficient to perform landing procedures

Compensate for the secondary effect of controls

Recognise and respond to conditions leading to a goaround

Carry out correct procedures in the event of a goaround

Calculate landing performance

Select and use relevant equipment including trim controls flaps carburettor heat and braking devices

Use of instruments to monitor aeroplane performance

Maintain compliance with regulatory requirements

Communicate effectively with others when landing an aeroplane including use of radio

Read and interpret instructions regulations procedures and other information relevant to landing an aeroplane

Interpret and follow operational instructions and prioritise work

Complete documentation related to landing an aeroplane

Operate electronic communication equipment to required protocol

Work collaboratively with others when landing an aeroplane

Adapt appropriately to cultural differences in the workplace including modes of behaviour and interactions with others

Promptly report andor rectify any identified problems that may occur when landing an aeroplane in accordance with regulatory requirements and workplace procedures

Implement contingency plans for unexpected events that may arise when landing an aeroplane

Apply precautions and required action to minimise control or eliminate hazards that may exist when landing an aeroplane

Monitor and anticipate operational problems and hazards and take appropriate action

Monitor work activities in terms of planned schedule

Modify activities dependent on differing workplace contingencies situations and environments

Work systematically with required attention to detail without injury to self or others or damage to goods or equipment

Adapt to differences in equipment and operating environment in accordance with standard operating procedures

Select and use required personal protective equipment conforming to industry and OHampS standards

Implement OHampS procedures and relevant regulations

Identify and correctly use equipment required when landing an aeroplane

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria required knowledge and skills the range statement and the assessment guidelines for this Training Package

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying

the underpinning knowledge and skills

relevant legislation and workplace procedures

other relevant aspects of the range statement

Context of and specific resources for assessment

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

Resources for assessment include

a range of relevant exercises case studies andor other simulated practical and knowledge assessment andor

access to an appropriate range of relevant operational situations in the workplace

In both real and simulated environments access is required to

relevant and appropriate materials and equipment and

applicable documentation including workplace procedures regulations codes of practice and operation manuals

Method of assessment

Assessment of this unit must be undertaken by a registered training organisation

As a minimum assessment of knowledge must be conducted through appropriate writtenoral tests

Practical assessment must occur

through activities in an appropriately simulated environment at the registered training organisation andor

in an appropriate range of situations in the workplace

Tasks may be undertaken in:

Performance may be demonstrated in:

Performance may be demonstrated on an aeroplane with:

Aeroplane may include:

Crew may include:

Instruments may be:

Limitations may be imposed by:

Classes of airspace may be:

Runways may include:

Landings include:

Dependent on the type of organisation concerned and the local terminology used, workplace procedures may include:

Information/documents may include:

Applicable regulations and legislation may include:

Performance includes tolerances specified in either of: