|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
Agent and/or condition may include: | real or potential hazard to be monitored and may include, but is not be limited to:biological agents such as insects, mites and bacteriaelectricityfibres, dusts, particulatesfumes, mists, gases, vapoursheat and humiditylightnoiseradiation (ionising, non-ionising, laser)vibration |
Characteristics may include: | dose factors relating to concentration and timehow an agent affects specific parts of the body, such as extent of damage to tissue and/or effects such as additive, antagonistic, synergism and potentiationhow an agent is absorbed into the bodyway an agent behaves in the environment, including over distance and time |
Defining the area where measurements are to be taken may include: | area/space availablelocationmovements of people and equipment number of persons occupying areaother factors that may impact on the sampling or data collection processesphysical features of equipment, such as emitting sources tasks/activities being undertaken |
Regulatory requirements and/or standards may include: | Australian and international standards, such as those produced by Standards Australia and the Australian Safety and Compensation Councilbiological exposure indicesexposure standards for atmospheric contaminants in occupational environmentsguidance material such as guidance notes, guides, fact sheets, model regulations and technical reports that provide practical guidance and directions for hazard controlmaterial safety data sheets (MSDSs)state/territory and commonwealth OHS legislation, regulations and codes of practice, including those relating to specific hazards |
Sampling process may include: | other practical and financial considerationsprocess, substance or hazard event likely to be causing the ill health or symptomssize of the workforce (i.e. individual worker or group/s of workers)type of exposure |
Information and data collected may include: | conditions such as activities and number of people present when measurements were madedate, time and duration of collectionlocations where information and data was collectedreadouts/measurements takensampling method (e.g. grab, longitudinal, continuous)specifications of equipment used |
Operability of equipment may include: | availability of appropriate attachments, leads, filters etcbattery serviceability checkscheck and function tests National Association of Testing Authorities (NATA ) tested and certified, with certificate of currency as appropriate |
Purpose of report may include: | as a basis for design of improved and/or new control measureshazard identification legal compliancerisk assessment |
Target audience may include: | designers and engineersmanagementOHS committee or OHS representativesOHS or environmental regulatory bodiesOHS professionals |
Required information and data may include: | agent/condition being monitored and key issues associated with the agent/conditionevaluation of results with reference to appropriate standardsinterpretation and discussion of resultssampling process:conditions at time of sampling, including whether the sampling period represented normal operating conditionshow measurements were takenlocations where samples were takenspecifications of equipment usedtable of results target audience for reportwhere, when and why measurements were taken |