Elements and Performance Criteria
- Plan and prepare.
- Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes.
- Safety (OHS) requirements are followed in accordance with safety plans and policies.
- Signage and barricade requirements are identified and implemented.
- Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement.
- Material quantity requirements are calculated in accordance with plans and specifications and quality requirements.
- Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use.
- Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied.
- Identify and select materials, processes and equipment.
- Work site is inspected to confirm suitability for the installation of columns.
- Manual handling risks associated with shifting and lifting columns are identified and selected.
- Appropriate employer-approved methods and equipment are identified and selected.
- Processes for installing columns are identified and selected.
- Fasteners and compounds compatible with the column materials are selected from manufacturer specifications.
- Columns are checked to ensure they conform to quality requirements and non-compliance is reported.
- Fit column and collars.
- Stop and finish joins and edges.
- Clean up.
- Work area is cleared and materials and fasteners are disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.
- Hazardous material is identified for separate handling.
- Non-toxic materials are removed using correct procedures.
- Dust suppression procedures are used to minimise health risk to work personnel and others.
- Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.