Elements and Performance Criteria
- Plan and prepare.
- Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes.
- Safety (OHS) requirements are followed in accordance with safety plans and policies.
- Signage and barricade requirements are identified and implemented.
- Plant, tools and equipment are selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement.
- Materials quantity requirements are calculated in accordance with plans, specifications and quality requirements.
- Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use.
- Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied.
- Prepare site and materials.
- Site area is set up for graffiti removal and preventative application processes to suit surfaces to be treated.
- Adjoining surfaces to application area are protected by masking off or covering prior to application of graffiti preventative coatings.
- Adequate ventilation is provided for application area.
- Stormwater protection systems are installed where appropriate.
- Remove graffiti.
- Preparation processes are selected to suit substrate surfaces and graffiti circumstances.
- Type of coating previously used to cover graffiti is identified in accordance with current industry standards of practice, manufacturer recommendations and specifications.
- Graffiti removal processes are applied to affected area in accordance with current industry standards of practice, manufacturer recommendations and specifications.
- Apply preventative application material.
- Substrate surfaces are cleaned and prepared for preventative application coatings in accordance with current industry standards of practice and manufacturer recommendations.
- Type of preventative coating to cover specific type of graffiti is identified and prepared in accordance with manufacturer recommendations and job specifications.
- Preventative application coating to cover specific type of graffiti is applied in accordance with manufacturer recommendations and job specifications.
- Clean up and store equipment.
- Painting equipment is dismantled, cleaned, maintained and stored in accordance with manufacturer recommendations and standard work practices.
- Unused materials are sealed and stored/stacked in accordance with standard material handling practices and company procedure.
- Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.
- Plant, tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.