Elements and Performance Criteria
- Plan and prepare.
- Work instructions, including plans, specifications, quality requirements and operational details are obtained from relevant information, confirmed and applied to the scope of work performed.
- Safety (OHS) requirements are followed in accordance with safety plans and policies.
- Signage and barricade requirements are identified and implemented.
- Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement.
- Materials quantity requirements are calculated in accordance with plans, specifications and quality requirements.
- Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use.
- Environmental requirements are identified for the project in accordance with environmental plans and statutory and legislative authority obligations and applied.
- Prepare templates for curved work or circular columns.
- Prepare background surface.
- Background surface is identified and wire-brushed if required.
- Dash coat is mixed and applied liberally to wetted surface.
- Bonding coats using patent products are applied to specifications.
- Metal beads are selected for external or squint arises.
- Metal beads are fixed to arises and checked for accuracy.
- Apply floating and rendering to flat and curved surfaces.
- Screeding lines or guides are established to specified tolerances.
- Float is used and applied to Australian standards and plans and specifications.
- Floating coat is applied and ruled off to screed.
- Surface is finished, plumbed and levelled to specified alignment tolerance.
- Heads, reveals and sills are finished square off to wall ace and back into opening.
- Internal angles, ceiling and floor lines are accurately cut.
- Apply floating and rendering coats to piers.
- Apply floating coat within metal beading.
- Finish rendering coats on flat walls, piers and curved work.
- Clean up.