Elements and Performance Criteria
- Prepare for work.
- Plans and specifications are obtained and confirmed by site inspection.
- Safety (OHS) requirements associated with fabricating and installing external flashings, and workplace environmental requirements, are adhered to throughout the work.
- Quality assurance requirements are identified and adhered to in accordance with workplace requirements.
- Tasks are planned and sequenced in conjunction with others involved in or affected by the work and statutory and regulatory authority requirements.
- Tools and equipment, including personal protective equipment, are selected and checked for serviceability.
- Work area is prepared to support efficient fabrication and installation of external flashings.
- Identify installation requirements.
- External flashings to be installed are identified and working drawings and patterns are developed from job drawings, plans, specifications, site measurements and relevant information.
- Materials, coatings, fixings, sealants and fasteners are checked for compliance with plans, specifications and standards and are compatible with adjacent materials and catchment.
- Materials are identified, ordered and collected in accordance with workplace procedures.
- Materials and equipment are checked for compliance with docket and order form and for acceptable condition, and faults are reported.
- Fabricate and install external flashings.
- External flashings are fabricated in compliance with standards, drawings, specifications and site measurements.
- Support framework is set out where required and fixed to comply with plans, specifications and manufacturer recommendations.
- Thermal insulation, where required, is set and fixed in accordance with plans, specifications and cladding manufacturer's recommendations.
- Clean up.
- Work area is cleared and materials disposed of or recycled in accordance with state and territory legislation and workplace procedures.
- Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace procedures.
- Documentation is completed in accordance with workplace requirements.