|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
OHS requirements: | are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include:personal protective equipment and clothingsafety equipmentfirst aid equipmentfire fighting equipmenthazard and risk controlfatigue managementelimination of hazardous materials and substancesmanual handling including shifting, lifting and carrying |
Legislative requirements: | are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include:award and enterprise agreementsindustrial relationsAustralian Standardsconfidentiality and privacyOHSthe environmentequal opportunityanti-discriminationrelevant industry codes of practiceduty of care |
Organisational requirements may include: | legal organisational and site guidelinespolicies and procedures relating to own role and responsibilityquality assuranceprocedural manualsquality and continuous improvement processes and standardsOHS, emergency and evacuation proceduresethical standardsrecording and reporting requirementsequipment use and maintenance and storage requirementsenvironmental management requirements including waste disposal, recycling and re-use guidelines |
Trusses may include | roof trussesfloor trusses |
Work requirements may include: | loading requirementsapplicable codescommon industry practicesspecific customer preferencestransport regulationsfabricating limitations |
Assessment may include | assessment of: concentrated loads and externally applied loads (wind, surround structures, common or special building usage)requirements for columns, beams and lintelsdimensions defining geometry and loading of individual trusses and frames |
Appropriate personnel may include: | supervisorsclientscolleaguesline managementsoftware support engineers |
Other sources may include: | suppliersmanufacturersarchitectbuilderlocal council |
Communication may include: | verbal and non-verbal languageconstructive feedbackactive listeningquestioning to clarify and confirm understandinguse of positive, confident and cooperative languageuse of language and concepts appropriate to individual social and cultural differencescontrol of tone of voice and body language |
Layouts | of roof trusses are carried out manually (tables and scientific calculator) |
Calculations may include: | quantities of timber for trusses and/or frames and/or floorsquantities of ancillaries and bracing costing of materials and labour |
Floor truss information may include: | spanspacingcantileverfloor loadingend support |
Design details may include: | timber component speciestypecross-sectiongradelength and cutting anglesnail plate and other joining hardware sizes marking requirements |
Assemblies | quoted and detailed may be: wooden roof and floor trusses and wall frames and beams for solid brick, brick veneer and timber frame domestic houses and light commercial structures, structural and non structural |
Assembly drawing | details for truss and frame may include design assumptions regarding supporting and tying components |
Installation packages may include: | roof and floor truss assembly drawings, design information, site and certifying authority standardswall frame assembly drawings, design information, installation information guides |
Industry standards may include: | Australian standardsinternational standardsnail plate provider standards |
Material may include: | timber of available species and solid or laminated types |