Elements and Performance Criteria
- Set up production processes
- Identify products, processes and production requirements in line with work order and site procedures.
- Prepare to work safely according to workplace work health and safety (WHS) requirements.
- Inspect equipment, tools and materials for operational effectiveness in line with manufacturer recommendations and site procedures.
- Conduct test run, by machining sample material in line with set-up processes and site requirements.
- Inspect machined product for faults and alter setup to rectify identified problems.
- Conduct finishing operations
- Measure and mark material for processing in line with work order and in consultation with appropriate personnel.
- Machine material and identify, remove and repair or dispose of defects in line with site procedures.
- Identify, investigate and resolve equipment faults and routine problems, as required.
- Clear work area and dispose of waste material in line with relevant environmental policies and procedures.
- Coat products
- Identify and plan coating requirements and select coat in line with site procedures.
- Prepare coating area to provide suitable clean area that minimises surface defects during drying, in line with site procedures.
- Open, decant and mix coat in line with manufacturer recommendations and safe work procedure.
- Apply coat according to planned method and sequence in line with manufacturer recommendations and site standards.
- Assess coat regularly to identify and remove faults in line with site standards.
- Dispose of products with coat faults in line with site procedures and environmental requirements.
- Clear work area, store materials and dispose of chemical waste according to site procedures and environmental protection requirements.
- Pack finished products
- Check finished products for faults and conformance, and segregate and store in line with workplace procedure and environmental requirements.
- Interpret packing requirements from work order and other relevant documentation.
- Pack finished products in line with site procedures and work orders, using suitable packing materials.
- Record packaged products in line with site procedures.
- Record and report finishing process to appropriate personnel.