Elements and Performance Criteria
- Prepare for cutting
- Review work order and where required check with appropriate personnel.
- Select appropriate personal protective equipment and check for operational effectiveness.
- Obtain type and quantity of material to be cut from storage location.
- Identify required cutting patterns and saw setup sequences.
- Check cutting equipment, make adjustments and start in line with manufacturer recommendations.
- Operate programmed machinery
- Select and set computer program to job specifications and check machine cycle.
- Complete trial run to check system operation and check board for length and angle specification within set tolerance.
- Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
- Load materials into machine, operate saw and monitor use regularly to minimise waste and ensure correct lengths and angles are produced.
- Monitor processing regularly to ensure continuity of material flow, and quality and quantity of production output.
- Dispose of incorrect cuts, off-cuts and material with defects in line with environmental protection practices.
- Identify routine processing problems and resolve or report to appropriate personnel.
- Monitor and adjust processing
- Follow organisational safety procedures to lock out equipment.
- Check saw blades for bluntness or damage.
- Remove and replace saw blades in line with manufacturer's recommendations.
- Dispose of used blades in line with environmental protection practices.
- Keep work area clear of dust and debris in line with organisational safety procedures.
- Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel.