Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Plan and conduct a site survey for setting up a wireless network
  2. Prepare design specifications and plan for secure enterprise WLANs
  3. Configure and test a controller-based WLAN
  4. Configure and test WLAN security
  5. Conduct WLAN maintenance and troubleshooting

Required Skills

Required skills

communication skills to liaise with internal and external personnel on technical operational and businessrelated matters

literacy skills to

interpret technical documentation

write reports as required

numeracy skills to

take test measurements and interpret results

evaluate performance and interoperability of network

planning and organisational skills to

coordinate the process in liaison with others

plan prioritise and monitor own work

problemsolving and contingencymanagement skills to

troubleshoot and debug WAN issues

adapt configuration procedures to requirements of network

reconfigure depending on differing operational contingencies risk situations and environments

research skills to investigate appropriate hardware to meet requirements

technical skills to

select and configure networking devices

assess and implement security requirements

use networking tools and site survey tools

Required knowledge

authentication and encryption methods

configuration verification and troubleshooting procedures to undertake

routeroperation and routing

VLAN switching and interswitching communications

configuration of WLAN securities

current wireless regulations standards and certifications

internetwork operating system IOS and IP networking models

RF and WLAN technology and network design

RF propagation and implementation issues

spread spectrum technologies

wireless network topologies and elements

wireless networking protocols

WLAN devices and their specification and use

WLAN radio frequencies characteristics and their measuring techniques

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the ability to

plan and conduct a WLAN site survey

produce design specifications and layout of wireless network

configure and test a controllerbased WLAN

test wireless security configurations

Context of and specific resources for assessment

Assessment must ensure access to

site where network installation may be conducted

hardware and software

organisational guidelines

computers

standalone and lightweight WLAN controllers and AP

hardware and software WLAN site survey tools

appropriate learning and assessment support when required

modified equipment for people with special needs

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge The following examples are appropriate for this unit

direct observation of the candidate installing configuring and testing a new or updated network

evaluation of documentation prepared by the candidate outlining testing procedures test results recommendation to network changes and completion records

verbal or written questioning of required knowledge

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector workplace and job role is recommended where appropriate

Assessment processes and techniques must be culturally appropriate and suitable to the communication skill level language literacy and numeracy capacity of the candidate and the work being performed

Indigenous people and other people from a nonEnglish speaking background may need additional support

In cases where practical assessment is used it should be combined with targeted questioning to assess required knowledge


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Client requirements may include:

accessibility

dropout rates

future scalability

grade of service (GoS)

infrastructure costs

interoperability to existing network

network growth

network RF coverage

network security

network traffic

operating budget

quality of service (QoS)

serviceability

service level agreement (SLA).

WLAN technology may include:

channels reuse and overlap

carrier sense multiple access/collision avoidance (CSMA/CA)

dynamic satellite survey (DSS)

multiple-input multiple-output (MIMO)

orthogonal frequency division multiplexing (OFDM)

rate-shifting

worldwide interoperability for microwave access (WiMAX)

wireless network topologies

wireless personal devices:

Bluetooth

cordless phones

personal digital assistant (PDA)

smartphone

wireless technology developed as an open global standard (ZigBee).

Network elements may include:

adaptors

access point (AP)

client

communications cables and connectors

controller

host

hubs

routers

servers

switches.

Network infrastructure may include:

additional antenna

lightning protection

mounting considerations

outdoor grounding

physical security

power over ethernet (PoE)

power including renewable sources

rack capacity

switch port capacity.

Wireless network topology may include:

basic mesh

bridging

basic service set (BSS)

extended service set (ESS)

independent basic service set (IBSS)

point-to-multipoint using BSS

point-to-point using IBSS.

RF deployment considerations may include:

AP location

basic RF site survey design related to channel re-use

building material

cell overlap

common RF interference sources such as devices

signal strength.

Survey model may include:

data

point-to-multipoint bridging

video point-to-point bridging

voice.

Deployment characteristics may include:

dense deployment

high mobility versus nomadic

internal meshing.

Physical site survey may include:

actual AP

RF power

simulated data rate to conduct the site survey

test radio equipment.

RF network design may include:

AP count

controller and licence requirements

location and type of network elements

location of additional APs for monitoring and sniffing

propagation patterns and attenuation

WLAN radio frequencies and characteristics.

Spread spectrum technology may include:

channels reuse and overlap

carrier sense multiple access or collision avoidance (CSMA/CA)

direct sequence spectrum (DSS)

multiple-input multiple-output (MIMO)

modulation

orthogonal frequency division multiplexing (OFDM)

rate-shifting

techniques:

direct sequence (DS)

frequency hopping (FH)

hybrids, combination of FH and DS

time hopping (TH).

WLAN RF principles may include:

antenna types

effective isotropic radiated power (EIRP)

reflection

refraction

RF gain/loss.

Wireless regulatory bodies, standards and certifications may include:

802.11a/b/g/n

European Telecommunications Standards Institute (ETSI)

Federal Communications Commission (FCC)

Wi-Fi Alliance.

Wireless network architectures may include:

lightweight access point (LWAP)

split media access control (MAC)

stand-alone AP versus controller-based AP.

WLAN controller and access points may include:

channel

command line interface (CLI)

graphical user interface (GUI)

interfaces

network time protocol (NTP)

power

wireless LANs (WLANs).

Controller-based AP discovery and association may include:

dynamic host configuration protocol (DHCP)

domain name system (DNS)

master-controller

n+1 redundancy

over the air provisioning (OTAP)

primary-secondary-tertiary.

Roaming may include:

Cisco centralised key management or proactive key caching (CCKM/PKC)

inter-controller

intra-controller

layer 2

layer 3.

Client operating system WLAN configuration may include:

Linux

Mac

Windows.

Security components may include:

authentication

encryption

intrusion prevention system (IPS)

management frame protection (MFP).

Identification assignments may include:

802.1q trunking

interface

service set identifier (SSID)

virtual local area network (VLAN)

wireless LAN identifier (WLANID).

Authentication methods may include:

802.1X

extensible authentication protocol-flexible authentication via secure tunnelling (EAP-FAST)

frame types:

associated or unassociated

control

data

management

guest

lightweight extensible authentication protocol

open (LEAP)

protected extensible authentication protocol (PEAP)

pre-shared key (PSK)

shared

wi-fi protected access (WPA) with extensible authentication protocol-transport layer security (WPA or WPA2 with EAP-TLS).

Sources of authentication may include:

local or external (EAP)

pre-shared key (PSK)

remote authentication dial-in user service (RADIUS).

Encryption methods may include:

advanced encryption standard (AES)

WPA or WPA2 with temporal key integrity protocol (TKIP).

Networking tools may include:

client troubleshooting

vendor debug

vendor logging.