1. Prepare for job
   • Job specifications are read and interpreted from job documentation or production control system
   • Set-up is carried out correctly in minimum time with minimum wastage
   • Availability of all job related components is checked
2. Set up delivery systems
   • Delivery systems are set up and adjusted according to job instructions
3. Set up laminating machine
   • Application system cylinder is set up and adjusted according to job specifications
   • Adhesive application system is set up and adjusted according to job specifications
   • Binding pressures are set and adjusted according to job specifications
   • Drying system is set up and adjusted according to job specifications
4. Set up in-line units
   • Minor in-line printing/converting/binding units are set up for basic processes and adjusted according to machine requirements and job specifications
   • Assistance is given in set-up of major in-line printing/converting/binding units
5. Conduct sample run
   • Raw material to be used for sample is organised correctly
   • Machine is set up and operated to produce a specified sample according to work health and safety requirements, manufacturer’s specifications and enterprise procedures
   • Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures
   • Results are interpreted to determine adjustment requirements
   • Adjustments are carried out according to product and machine specifications

This section specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.