Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Cut cutting forme wood
  2. Prepare knives, creasers and cutting forme rubbers
  3. Set stripping material
  4. Proof the cutting forme
  5. Maintain cutting forme and stripper

Required Skills

Required skills

OHS in relation to operating machinery such as safely switching off machinery before cleaning is started

communication skills by recording the cutting formestripper identification number and reporting problems to supervisors or the maintenance department

planning and organising by cleaning the cutting forme machine according to OHS and enterprise procedures

teamwork when setting cutting formes and strippers in a workplace context

using technology by using cutting formes and strippers

problem solving by noting cutting forme making machine maintenance problems

Required knowledge

checks made to correctly position bridge holes

reinforcing bridge holes

checks that can be performed to ensure that the saw cuts accurately match the line drawings

checks made when cutting and shaping the knives and creasers

OHS concerns that are there when setting knives

factors that determine the amount of rubber attached to the forme

factors that determine the positioning of the rubber on the forme

important items to consider when setting the knives and creasers into position on the forme blank

checks made when attaching stripping materials to stripper backing materials

completing the attachment of stripper materials accurately

purpose of the mounting strips

areas that must be proofed to ensure that the cutting forme meets the production order specifications

importance of allocating numbers to each forme

method of recording the forme allocation numbers that is the accepted formula

OHS factors that must be considered when cleaning the machine

areas of the machine that need regular cleaning

materials that need to be cleaned from the machine

keeping the machine clear of surface rust condensation

recommended cleaning agents

method of recording and reporting machine maintenance problems

indicators that show that the machine is in need of oilinggreasing

conditions to be noted when notingreporting the status of the cutting forme or stripper

importance of monitoring the condition of the forme and stripper

machine manuals safety and other documentation that are relevant to this task and where they are kept and information that is included in these documents

other sources of information that are available

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential

correctly setting the cutting formes and strippers according to job specifications and within the production timeframe

demonstrate an ability to find and use information relevant to the task from a variety of information sources

prepare TWO cutting formes ONE large ONE small to accommodate TWO differing typically used substrates using all of the relevant processes according to manufacturers and job specifications enterprise procedures and the listed Performance Criteria

Context of and specific resources for assessment

Assessment must ensure

assessment may take place on the job off the job or a combination of these

off the job assessment must be undertaken in a closely simulated workplace environment

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge The following examples are appropriate for this unit

direct questioning combined with review of portfolios of evidence and third party workplace reports of onthejob performance by the candidate

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector workplace and job role is recommended for example

ICPCFC Prepare for cutting forme and stripper making

ICPCF311C Prepare for cutting forme and stripper making.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Enterprise procedures may include:

range of enterprise procedures within defined work area.

Complexity of process may include:

varied cutting formes according to manufacturer's differentiations.

Quality processesandstandards may include:

should meet client requirements and enterprise and industry standards.