Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Maintain operation of reel (OR Element 2)
  2. Maintain operation of sheet transportation system on sheet-fed machine (OR Element 1)
  3. Maintain complex flat-bed cutting process
  4. Maintain operation of production process
  5. Identify and rectify problems
  6. Conduct shutdown of production process
  7. Clean flat-bed cutting machine at end of run

Required Skills

Required skills

OHS when ensuring that the work area is safe and ready for production according to safety requirements

communication skills when reading and interpreting job requirements from the job documentation

planning and organising when setting up the machine for operation

teamwork when confirming the sample with the supervisor

applying mathematical ideas and techniques when positioning the forme and counters

using technology by using machines

problem solving by interpreting results to determine adjustment requirements

Required knowledge

OHS factors that must be considered when setting up andor operating machine transport systems

areas of the reel stand that should be monitored to ensure troublefree operation

area of the web control system that should be adjusted to maintain correct web tension

area of the web control system that should be adjusted to maintain correct positioning of the web

areas of the sheetfed feeder that should be monitored to ensure troublefree operation

parts of the sheet pickup system that are to be adjusted to ensure accurate and continuous sheet handling

OHS factors that must be considered when setting up andor operating machine delivery systems

areas of the delivery system that should be observed to maintain tension

areas of the delivery system that should be observed to prevent damage to the finished product

checks to be made when substrate is removed from the machine

OHS factors that must be considered when maintaining the cutting process

indicators that demand the replacement of a knife

checks to be made when cutting pressure is adjusted

ways in which registration can be guaranteed

production difficulties that can be expected during production runs

OHS factors that must be considered when problem solving on the machine maintaining the cutting process

checks to be made when packing cutting devices

checks to be made when correcting dull cutting edges on equipment

checks to be made when correcting the depth of embossing

checks to be made when correcting outofsquare results

OHS factors that must be considered when conducting machine shutdown procedures

checks to be made when waste is removed from the machine and surrounding area for disposal or recycling

checks to be made when shutting down the machine

checks to be made when the cutting devices or knives are cleaned or replaced ready for the next run

areas of the machine that require cleaning at the end of the run

production records that need to be kept or written up

information that should be included in this reporting procedure

quality aspects that should be considered in a completed cutting job

steps that should be taken to ensure that important features of the production control system are followed

machine manuals safety and other documentation that are relevant to this task and where they are kept and information that is included in these documents

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential

produce complex flatbed die cut or embossed product with different substrates sizes and patterns according to job specifications

demonstrate all safety devices on the machine

competency must be demonstrated on EITHER flatbed die cutting OR embossing For either process produce TWO complex jobs including inline processes with different substrates sizes and patterns according to manufacturers and job specifications enterprise procedures and the listed Performance Criteria

demonstrate use of computerised control monitoring and data entry systems if available and appropriate

evidence for assessment may be gathered from assessment of the unit of competency alone or through an integrated assessment activity

Context of and specific resources for assessment

Assessment must ensure

assessment may take place on the job off the job or a combination of both of theses

off the job assessment must be undertaken in a closely simulated workplace environment

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge The following examples are appropriate for this unit

direct questioning combined with review of portfolios of evidence and third party workplace reports of onthejob performance by the candidate

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector workplace and job role is recommended


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Substrate handling may include:

wide or narrow reel or large or small sheet handling systems.

Cutting process may include:

flat-bed die and forme cutting, embossing.

In-line processes may include:

minor processes that are integral to this competency can include basic in-line operations such as perforating, numbering, slitting that do not in themselves constitute another defined unit of competency. Where a major in-line process is defined as a separate competency (eg flat-bed cutting, folding) it should be assessed as such.

Flat-bed cutting units may include:

a range of machines with dies, cutting formes or drills and manual, semi-automated, fully automated or computerised process control.

Shapes may include:

complex or multiple shapes.

Substrate types may include:

range of substrates within the major categories of paper, pressure sensitive material, board, plastics and related films, or metal.