Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Maintain non-routine operation of reel transportation system
  2. Maintain non-routine operation of reel delivery system on web-fed machine
  3. Maintain complex flexographic printing process
  4. Maintain non-routine production process
  5. Identify and rectify faults
  6. Conduct shutdown of production process
  7. Clean and wash up printing machine at end of print run

Required Skills

Required skills

OHS in relation to operating machinery such as safely switching off machinery before cleaning is started

communication of ideas and information by interpreting the job brief and providing advice to clients about options and limitations

collecting analysing and organising information by collecting and analysing data about printing process machine specifications and performance to calculate appropriate adjustments for the job

planning and organising activities by providing information about time and materials requirements for production scheduling

teamwork when maintaining the production process in association with others

mathematical ideas and techniques by calculating substrate requirements plate position and pressures

problemsolving skills by recognising proofing faults and calculating adjustments necessary to meet job specifications

use of technology by using monitoring equipment and making adjustments

Required knowledge

reel transportation and web control

causes of the reel to wander

cause the web to break at the unwind unit

difference between a flying paster and zero speed type reelstand

print fault that would result from the reel being run out of centre

possible faults in the unwind section that could cause a web break

reel delivery for rewinding and sheeting

OHS risks associated with rewinding and sheeting

hat safety feature in the delivery system if the web jams up

why the sheet cutoff would wander

effect of poorly adjusted nip rollers when rewinding and sheeting

printing and drying units

result if the plate lifts on the leading edge during a print run

buildup of ink on the impression cylinder affecting the printed product

causes of the ink foaming in the ink tray

effect of too much reducer in the ink

actions that reduce wear of the doctor blade

necessary that all solvents be removed from the final ink film

the link between driers and set off and marking

causes of UV ink to dry

causes substrate to distorting

effect in the chillers if the drying temperature was too low

effect of incorrect drying temperature on the finished product

advisable not to eat or drink near the machine when using UV inks

necessary to frequently examine the inline components of the job

how the consistency of the punching unit IS checked

result of excessive pressure on the slitters

maintaining production process

safety features within the organisation aid in maintaining effective production

who would be held legally responsible for the removal of machine guards andor disconnection of micro switches

effect of inadequate communication within the work team on a flexographic printing machine

ramifications if machine guards are removed andor micro switches are disconnected on a machine

other measurements besides optimum solid ink density can be measured to assess print quality accurate method of checking register during a production run

necessary to take immediate action when production problems are anticipated

actions to be taken to eliminate further processing of unacceptable printed product

the result to the substrate if the relative humidity is increased in the press room

procedure to care for a newly delivered substrate to the press room

why should waste be sorted

advantage of keeping reusable waste

industry standards that can be applied to enhance effective communication with the client

necessary procedures that the client should follow to OK a printed product

flexographic machine operating problems

when it would be necessary to call service personnel to correct a machine problem

enterprise procedures that are in place to report any machine operating problems

shutdown procedures

result if correct shutdown procedures were not followed

necessary that correct shutdown procedures are conducted with fellow workers

advantages that result from proper labelling and storage of excess inks and materials

printed product needs to be clearly labelled prior to removal from the press room

further operations that are required for printed reels upon removal from the printing machine

how the printed job should be stored after removal from the printing machine

cleaning and washing up the printing unit

OHS concerns should be observed when handling ink

safety precautions should be observed when cleaning the printing cylinders

necessary to thoroughly clean and wash up the printing unit prior to the next print run

why the anilox cells should be thoroughly cleaned

how can plates be stored to minimise damage

cleaning feed transportation delivery and inline sections

OHS precautions that should be observed when cleaning these sections of the machine

necessary to maintain a clean substrate handling section of the machine

completing production records

completed records used in the final analysis of the job

benefits of comprehensive records when considering the production of future jobs

machine manuals safety and other documentation that are relevant to this task and where are they kept and information is included in these documents

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the ability to

operate a reelfed flexographic press ensuring an efficient or more colour production flow that maintains product quality standards Any production problems are anticipated and rectified with minimum downtime The machine is correctly shut down and cleaned according to OHS guidelines

demonstrate use of computerised control monitoring and data entry systems if available and appropriate

demonstrate an ability to find and use information relevant to the task from a variety of information sources

monitor production output and make necessary adjustments to maintain print quality on a flexographic machine whilst producing a complex print on TWO occasions if possible using different substrates and if possible including at least TWO inline processes according to job specifications enterprise procedures and the Performance Criteria

evidence for assessment may be gathered from assessment of the unit of competency alone or through an integrated assessment activity

Context of and specific resources for assessment

Assessment must ensure

assessment may take place on the job off the job or a combination of these Off the job assessment must be undertaken in a closely simulated workplace environment

flexographic press

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge The following examples are appropriate for this unit

direct questioning combined with review of portfolios of evidence and third party workplace reports of onthejob performance by the candidate

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector workplace and job role is recommended for example

ICPPRC Mount and demount flexographic plates for complex printing

ICPPR411C Mount and demount flexographic plates for complex printing

ICPPRC Set up for complex flexographic printing

ICPPR413C Set up for complex flexographic printing.

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Substrate handling may include:

wide and narrow reel delivery systems.

Non-routine may include:

non-routine within this context relates to the set up and production of print runs. The set up of equipment and production involves a significant amount of deviation from using standard equipment settings. It also involves significant problem solving and the development of new criteria and procedures for performing current practices. It does not refer to a job that an individual does only occasionally.

In-line processes may include:

minor processes that are integral to this competency can include basic in-line operations such as perforating, numbering, date coding, slitting that do not in themselves constitute another defined unit of competency. Where a major in-line process is defined as a separate competency (eg flat-bed cutting, folding) it should be assessed as such.

Inks/coatings may include:

range of inks commonly used in 4 or more colour printing, including standard and special colours.

Machines may include:

range of stack, in-line and central impression flexographic printing machines with manual, semi-automated, fully automated or computerised process control.

Colour matching systems may include:

use of viscosity controls, densitometers and spectrophotometry.

Design may include:

4 or more colours, complex graphics and text. Critical "tight" registration, fit and position, registration should be at least that required for four-colour process work.

Substrate types may include:

range of substrates within the major categories of paper, pressure sensitive material, board, corrugated board, plastics and related films, or metal.