Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Determine set up and operating requirements of woodworking machines
   • Applicable legislative, OHS and organisational requirements relevant to the selection and use of static woodworking machines are verified and complied with
   • Set up requirements for static woodworking machines are identified according to furniture design and safety requirements
   • Operating requirements to achieve design outcomes are identified and safety requirements determined
2. Set up and operate static woodworking machines
   • Selected machines are checked for serviceability, precision settings, maintenance compliance and safety
   • Work specifications and instructions are interpreted and machines are set up to perform operations
   • Machines are operated according to manufacturer's operating procedures to achieve required work outcome
   • Work is monitored to ensure quality standards are met
   • Safety procedures are followed
3. Maintain static woodworking machines
   • Machines are assessed for performance compliance
   • Faults or non compliances are identified and rectified, replaced or reported according to workplace procedures
   • Problem solving techniques are applied to identify and address operational problems
   • Routine maintenance is conducted to ensure optimal performance of machines
   • Work area is maintained to housekeeping standards
   • All machines are cleaned, maintained and stored in accordance with manufacturer specification

Required Skills

This describes the essential skills and knowledge and their level required for this unit

Required skills

collect organise and understand information related to work orders basic plans and safety procedures communicate ideas and information to enable confirmation of work requirements and specifications coordination of work with site supervisor other workers and customers and the reporting of work outcomes and problems interpret and apply technical and quality information in the identification selection and maintenance of static woodworking machines work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity use prechecking and inspection techniques which relate to the use of machines to avoid rework and wastage identify the most appropriate tool the setting specifications and the methods for maintaining the high precision needs throughout the work sequence recognise and respond to circumstances outside instructions or personal competence plan and organise activities including the preparation and layout of the worksite and the obtaining of equipment and materials to avoid any back tracking work flow interruptions or wastage use mathematical ideas and techniques to correctly complete measurements calculate area and estimate other material requirements clarify and confirm work instructions plan work within given task parameters accept responsibility for given tasks set monitor and satisfy personal work goals satisfy the competency requirements for the job maintain current knowledge of machines and materials seek learning opportunities use the limited workplace technology related to the selection and use of static woodworking machines

Required knowledge

State or Territory OHS legislation regulations standards and codes of practice relevant to use of static woodworking machines organisational and site standards requirements policies and procedures for use of static woodworking machines types characteristics uses limitations and maintenance requirements of the range of static woodworking machines used in furniture production manufacturing specifications for static woodworking machines processes for evaluating the quality of static woodworking machines in terms of specifications safety maintainability and commercial reputation established communication channels and protocols problem identification and resolution workplace safety requirements and OHS legislation work flow within the workplace

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria Required Skills and Knowledge the Range Statement and the Assessment Guidelines for the relevant Training Package
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit	Comply with legislation regulations standards codes of practice and established safe practices and procedures for the use of static woodworking machines Interpret design requirements and locate and apply relevant information Apply safe handling requirements for equipment products and materials including use of personal protective equipment Locate and apply relevant information related to static woodworking machines Set up operate and maintain static woodworking machines listed in the range statement Follow work instructions operating procedures and inspection practices to prevent damage to goods equipment and products maintain required production output and product quality minimise the risk of injury to self and others Work effectively with others Modify activities to cater for variations in workplace contexts and environment
Context of and specific resources for assessment	The application of competency is to be assessed in the workplace or simulated workplace Assessment is to occur under standard and authorised work practices safety requirements and environmental constraints Assessment of essential underpinning knowledge other than confirmatory questions will usually be conducted in an offsite context Assessment is to comply with relevant regulatory or Australian Standards requirements The following resources should be made available workplace location or simulated workplace range of quality hand tools and support documentation a legitimate specialist hand tool requirement specifications and work instructions
Method of assessment	Assessment must satisfy the endorsed assessment guidelines of the Furnishing Industry Training Package Assessment methods must confirm consistency and accuracy of performance over time and in a range of workplace relevant contexts together with application of underpinning knowledge Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application Assessment may be applied under project related conditions real or simulated and require evidence of process Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance but is able to be transferred to other circumstances Assessment may be in conjunction with assessment of other hand tools related units of competency
Guidance information for assessment

---

Range Statement

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.
Legislative requirements	are to be in accordance with applicable legislation from all levels of government that affect organisational operation requirements may include but not be limited to award and enterprise agreements, industrial relations, Australian Standards, confidentiality and privacy, OHS, the environment, equal opportunity, anti-discrimination, relevant industry codes of practice, duty of care and heritage
OHS requirements	are to be in accordance with Commonwealth, State or Territory legislation and regulations, organisational safety policies and procedures requirements may include but not be limited to the use of personal protective equipment and clothing, fire fighting equipment, first aid equipment, hazard and risk control and elimination, control of hazardous materials and substances, manual handling including lifting and carrying
Organisational requirements	may include but not be limited to legal, organisational and site guidelines, policies and procedures relating to own role and responsibility, quality assurance, procedural manuals, quality and continuous improvement processes and standards, OHS, emergency and evacuation, ethical standards, recording and reporting, access and equity principles and practices, equipment use, maintenance and storage, environmental management (waste disposal, recycling and re-use guidelines)
Static woodworking machines	include table saw, thicknesser, jointer and band saw
Instructions	may include but not be limited to workplace procedures relating to the use and operation of tools and equipment, production planning figures, workplace instructions, including job sheets, plans, specifications, drawings and designs, workplace procedures relating to reporting and communications, and manufacturer instructions for the use of equipment and materials
Problem solving techniques	may include but not be limited to root cause analysis, consultation with colleagues, designers, manufacturers, technicians and maintenance personnel, resetting of machine and routine maintenance

---