Elements and Performance Criteria
- Prepare for work
- Characteristics of the surface and the required surface coating are identified from work orders or instructions
- Processing and application techniques, time and safety requirements are identified and used for work planning
- OHS requirements, including ventilation requirements and personal protection needs, are observed throughout the work
- Tools, equipment and accessories are identified and checked for safe and effective operation for the surface coating task
- Stains, lacquers, polish, enamels, acrylics, one-pot polyurethane and water-based coatings are identified and prepared as required for the surface coating tasks
- Check and prepare for spraying
- Products with surface or other faults are identified and faults reported or repaired as appropriate
- Other products and equipment in the workplace are protected from overspray
- Trial applications of surface materials are made to check condition of spray system, spray patterns, equipment operation, materials viscosity and specified surface finish
- Unserviceable components are cleaned or replaced and spray system reassembled
- Spray pattern faults are identified and rectified in accordance with workplace procedures.
- Material faults are identified and workplace procedures for rectification are followed
- Apply surface coating
- Surfaces are kept free of contamination
- Surface coatings are applied according to workplace procedures
- Surface build and coverage is checked against workplace requirements for even spread and thickness
- Rectification of surface faults are made in accordance with workplace procedures
- Products are inspected and approved for suitability for further processing
- Clean work area and maintain equipment