Elements and Performance Criteria
- Prepare for work
- Work instructions are used to determine job requirements including design variations, tolerances, process, materials, finish and quantity
- Work sequence is planned
- Procedures are determined for checking quality at each stage of the process
- Workplace health and safety requirements, including personal protection needs, are observed throughout the work
- Suitable work area is selected for the task
- Preparatory drawings/set outs for tasks are confirmed
- Materials are selected following work instructions
- Tools and equipment suitable for the work are identified and checked for safe and effective operation
- Fabricate and assemble components
- Material is set out according to work instructions, prepared, and components are marked according to workplace procedures
- Tools, machines and equipment are used in accordance with safety requirements and manufacturers' specifications
- Components are fabricated including any specified shapes, angles or curves and checked against set out and job requirements
- Components are fitted to job requirements
- Assembly process is undertaken according to workplace procedures
- Item is checked for compliance with specifications
- Item is finished in accordance with work instructions
- Finalise operation and maintain equipment
- Work area is cleaned, hand and/or power tools and equipment is cleaned, maintained and stored in accordance with workplace procedures
- Off-cuts and unused materials are collected and stored for re-use or disposed following workplace procedures
- Waste and scrap materials are dealt with following workplace procedures