Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Inspect fixed wing flight control systems and components.
   • Isolation tags already attached to the system or related systems are checked and aircraft configured for safe system inspection and operation in accordance with applicable maintenance manual.
   • Fixed wing flight control systems and components are visually or physically checked for signs of defects in accordance with applicable maintenance manual
2. Test fixed wing flight control systems.
   • Powered controls of the aircraft and system are prepared, in accordance with maintenance manual, for the application of electrical and hydraulic power.
   • Power is applied, if necessary, and system is functionally tested, in accordance with applicable maintenance manual, for malfunction or evidence of incorrect rigging..
   • System rigging is performed in accordance with applicable maintenance manual
3. Prepare for troubleshooting
   • Relevant maintenance documentation and modification status, including system defect reports where relevant, are interpreted to identify an unserviceability.
4. Troubleshoot fixed wing flight control systems.
   • Available information from maintenance documentation and inspection and test results is used, where necessary, to assist in fault determination.
   • Maintenance manual fault diagnosis guide and logical processes are used to ensure efficient and accurate troubleshooting.
   • Specialist advice is obtained, where required, to assist with the troubleshooting process.
   • Fixed wing flight control system faults are located and the causes of the faults are clearly identified and correctly recorded in maintenance documentation, where required.
   • Fault rectification requirements are determined to assist in planning the repair.

Required Skills

Required skills

Look for evidence that confirms skills in Application of relevant occupational health and safety OHS procedures The use of relevant maintenance documentation and aircraft manuals to Recognise defects during visual inspection of fixed wing flight control systems and system components Rig fixed wing flight control systems Functionally test the operation of fixed wing flight control systems and recognise systemcomponent malfunction or evidence of incorrect rigging To the extent permitted by applicable fault diagnosis guides troubleshooting unserviceabilities in fixed wing flight control systems and clearly recording the causes of the unserviceabilities

Required knowledge

Look for evidence that confirms knowledge of OHS precautions relevant to flight control system maintenance Standard trade practices relating to tool and testrigging equipment usage and installationsecuring of system components Flight control system layout and operation Theory of flight Airflow Conditions of flight Lift and forces Drag Wings tailplane and vertical stabiliser Lift augmentation flaps slats slots Aircraft control surfaces and their function elevator ailerons rudder elevons trim tabs Spoilers and speed brakes Flight control balancing and flutter Stability and control and flight control rigging Mechanical system layout and operation Cockpit controls Cables and cable tensioning Pulleys and fairleads Bellcranks Levers Control surface horns Screwjacks Pushpull rods Powered flight controls system layout and operation component construction and operation electrical and instrument interfaces flaps trim position indication Flight control system maintenance procedures and troubleshooting methods Flight control system interfaces with automatic pilot systems Relevant maintenance manuals Relevant regulatory requirements and standard procedures

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package
Overview of assessment	A person who demonstrates competency in this unit must be able to apply hand skills and use maintenance publications to inspect test and troubleshoot fixed wing aircraft flight control systems and components while applying all relevant safety precautions
Critical aspects for assessment and evidence required to demonstrate competency in this unit	The underlying skills inherent in this unit should be transferable across a range of inspection testing and troubleshooting applications including the timely involvement of supervisors or other trades associated with the aircraft fixed wing flight systems It is essential that testing procedures take into account all safety precautions associated with flight control system operation in particular where system operationswitching interrelates to other systems being maintained and that an awareness be demonstrated of dual inspection requirements associated with work on flight controls and systems Evidence of transferability of skills and knowledge related to inspection testing and troubleshooting is essential This may be demonstrated through application across a number of aircraft types Ability to interpret inspection procedures and specifications allowable limits and apply them in practice is critical In addition knowledge of dual inspection requirements must be demonstrated The application of ground testing procedures should clearly indicate knowledge of system operation the relationship of individual components and the links with other systems if applicable within the limits of the aircraftsystem fault finding guide before undertaking any action The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the Unit of Competency are being achieved under routine supervision on at least one item from each of Groups to in the Range Statement This shall be established via the records in the Log of Industrial Experience and Achievement or where appropriate an equivalent Industry
Context of and specific resources for assessment	Competency should be assessed in the work environment or simulated work environment using tools and equipment specified in aircraft maintenance manuals It is also expected that general purpose tools test and ground support equipment found in most routine situations would be used where appropriate The level of troubleshooting is limited in its application to the use of fault diagnosis guides or other similar information
Method of assessment
Guidance information for assessment

---

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Note	Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide.
Flight control systems and system components	Flight control systems and system components may include: 1. Elevator, aileron and rudder primary flight control systems and associated trim systems 2. Speed brake, spoiler, flap and high lift systems 3. Ailerons, elevators, rudders, trim tabs, speed brakes, spoilers, flaps, slats 4. Actuators - mechanical, hydraulic, pneumatic or electric 5. Mechanical flight control components (cables, pulleys, guides, fairleads, tension regulators, control rods, bellcranks, torque tubes, chains, sprockets, control sticks, wheels or columns, trim wheels or handles, rudder pedals).
Troubleshooting	Troubleshooting involves the use of fault finding charts or similar, to line replacement level.
	Application of this unit may relate to: Scheduled or unscheduled maintenance activities Individual or team related activities
Procedures and requirements	Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise

---