Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Determine requirements
   • Rotary wing component defect reports (removal tags) or customer order are correctly interpreted and matched by part and serial numbers
   • Components are inspected and/or operated through prescribed test procedures to establish serviceability or confirm defects, as required
   • Modification status is clearly established to assist in determining the overhaul requirements for the components
   • Extent of overhaul or repair is identified and documented in accordance with standard enterprise procedures
2. Troubleshoot rotary wing comp
   • Available information from maintenance records and test results is used, where necessary, to assist in fault determination
   • Logical processes are used to ensure efficient and accurate troubleshooting
   • Specialist advice is obtained, where required, to assist with, or confirm, the fault and rectification requirement
   • Rotary wing component faults are located and the causes of the faults are clearly identified
   • Fault rectification requirements are determined to assist in planning the repair
3. Dismantle and inspect rotary wing component parts
   • Rotary wing component parts are dismantled in accordance with maintenance manuals while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDS) and items of personal protective equipment (PPE)
   • Component parts are assessed for serviceability in accordance with the relevant maintenance documentation
   • Parts requiring specialist repair are tagged and repair instructions are specified in accordance with standard enterprise procedures
   • Parts requiring non-destructive testing (NDT) are prepared for testing in accordance with the relevant maintenance documentation
   • Parts lists are compiled and processed in accordance with standard enterprise procedures
4. Repair and/or modify rotary wing components or parts
   • Rotary wing component parts are repaired or replaced in accordance with the relevant maintenance documentation
   • Modification of components or parts is undertaken, where required, by relevant manufacturers’ bulletins or procedures
5. Assemble, test and adjust rotary wing components
   • Component parts are assembled within specified tolerances and in accordance with the appropriate maintenance documents while observing all relevant WHS requirements, including the use of MSDS and items of PPE
   • Rotary wing components are adjusted, tested or calibrated to operate within prescribed specifications
   • Finished components are tagged, sealed and packaged in accordance with standard enterprise procedures
   • Required maintenance documentation and modification records are completed and processed in accordance with standard enterprise procedures

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.
Rotary wing components include:	Rotor blades Rotor heads, hinge assemblies and swashplates Transmission gear boxes, drive shafts and couplings
Repair of component parts includes:	Finishing or re-finishing of metal surfaces through processes, such as polishing, lapping and blending of damage within maintenance manual limits Removal of corrosion within maintenance manual limits Replacement of seals and gaskets Replacement of bearings Application of surface treatments, such as alodining Restoration of paint finishes
Testing and adjustment:	Complex testing and adjusting of components, where required, will be carried out under supervision at the appropriate level
Procedures and requirements include:	Industry standard procedures specified by manufacturers, regulatory authorities or the enterprise

---

Performance Evidence

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:

applying relevant WHS procedures, including the use of MSDS and PPE

using relevant maintenance documentation, specifications and aircraft/component manuals to:

recognise state of serviceability and overhaul or repair requirements for rotary wing components as listed in the Range of Conditions

test and accurately and efficiently troubleshoot unserviceabilities and document the causes in rotary wing components

dismantle and inspect rotary wing component parts for serviceability and identify repair requirements as applicable

repair/replace/modify rotary wing component parts

assemble, balance as required, test for correct operation and adjust rotary wing components

correctly tagging, sealing and packaging completed components.

The underlying skills inherent in this unit should be transferable across a range of repair and/or overhaul applications associated with aircraft components. It is essential that the maintenance procedures are interpreted and applied to ensure quality and safety standards are achieved.

This shall be demonstrated through application across a number of different aircraft components. Ability to assess component serviceability and interpret parts requirements will be necessary to supplement the required evidence. Capability to interpret inspection procedures and specifications (allowable limits) and apply them in practice is critical.

---

Knowledge Evidence

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

how to obtain relevant MSDS

the use of applicable items of PPE

WHS procedures

fault diagnosis techniques

system and component operation

repair and overhaul procedures and processes.

---